Siemens 6ES7153-1AA03-0XB0 – SIMATIC ET 200M IM153-1 PROFIBUS DP Interface Module

The Siemens 6ES7153-1AA03-0XB0 is an IM153-1 interface module for SIMATIC ET 200M. In simple terms, it turns a rail of S7‑300 I/O modules into a distributed station on PROFIBUS DP. From my experience, this variant is a go-to for plants upgrading legacy DP networks or keeping brownfield racks running with minimal changes—address it, wire PROFIBUS, and your ET 200M station joins the line with predictable diagnostics and behavior.

Company’s Order Placement Process and Guarantees

• Warranty: 365 days
• Delivery time: 1 week for in-stock; no more than 1 month at the latest
• Payment method: 50% advance payment, full payment for delivery
• Express delivery methods: FedEx, UPS, DHL
• Pre‑shipment: functional test and visual inspection; ESD-safe packing

Key Features

• PROFIBUS DP interface (up to 12 Mbit/s) – Connects ET 200M to DP as a slave/device; straightforward integration with S7‑300/400 and many third‑party masters.
• Backplane bridge to ET 200M I/O – Links the DP network to S7‑300 signal/technology modules on the station backplane.
• Practical diagnostics – Front LEDs for BF/SF/RUN help maintenance pinpoint field vs. network issues fast.
• Simple addressing – Station address typically set via front rotary switches; ideal for quick swaps.
• Compact S7‑300 form factor – Slim module width keeps ET 200M stations tidy on 35 mm DIN rail.
• Proven in 24/7 duty – Built for continuous operation; in many cases runs for years with only basic care.

Technical Specifications

Application Fields

You’ll typically find the 6ES7153-1AA03-0XB0 wherever reliable DP-based remote I/O is needed and cabinet reuse matters:

• Packaging and material handling – tying remote sensors/actuators to a main S7 controller over PROFIBUS.
• Water & wastewater – compact ET 200M panels distributed along basins or pump rooms.
• Metals, mining, cement – rugged DP networks where diagnostics and uptime count.
• Process skids and OEM machines – standardized ET 200M stations for fast commissioning.

A plant tech summed it up well: “We set the address, snapped in the Sub‑D, and the BF cleared right away. Swap time was under 10 minutes.” That’s been fairly typical in my projects too.

Advantages & Value

• Reliability – Stable 24/7 operation on established PROFIBUS infrastructures.
• Compatibility – Works with standard ET 200M/S7‑300 modules; preserves existing wiring and cabinet layout.
• Cost control – Extends the life of DP systems; avoids premature migration and revalidation.
• Maintainability – Clear status LEDs, rotary addressing, and familiar mechanics shorten downtime.
• Delivery assurance – Practical lead times and tested parts help you hit outage windows.

Installation & Maintenance

• Panel environment: Mount on 35 mm DIN rail; keep ambient typically 0…60 °C; non‑condensing humidity; ensure ventilation.
• Power & grounding: Feed 24 V DC to the IM; bond the DP cable shield at the connector; maintain a solid panel ground.
• Addressing & bus: Set the DP address on the front switches; use shielded PROFIBUS cable; enable termination only on the first/last node.
• Backplane & modules: Seat I/O modules firmly on the ET 200M backplane; check front connector torque on the signal modules.
• ESD & handling: Handle by edges with a grounded wrist strap; store in ESD bags when off the rail.
• Routine care: Periodic dust removal, check BF/SF logs in the PLC, and verify DP cable/connector condition during outages.

Quality & Certifications

• Manufactured under Siemens quality systems; typically aligned with ISO 9001.
• CE marking for EMC and safety; many variants are UL/cUL Recognized for industrial control equipment.
• RoHS compliance by series generation; we can confirm via part/serial if needed.
• Warranty: 365 days repair/replace coverage from delivery.