OEM 60017.001-08-090_0201003920190505-06 – Factory-Terminated Cable Assembly for PLC/Drive Connections

The 60017.001-08-090_0201003920190505-06 appears to be a factory-terminated industrial cable assembly, typically used to link controllers, I/O modules, drives, or encoder/sensor blocks inside a control cabinet. From my experience, these OEM-coded harnesses are chosen because they’re plug-and-play—no field crimping, predictable pinout, and repeatable quality. You might notice that the “-090” suffix commonly maps to a 0.9 m length, which fits nicely between marshalling rails and device bays without excess slack.

Company’s Order Placement Process and Guarantees

• Warranty period: 365 days
• Delivery time: 1 week for in-stock; no more than 1 month at the latest
• Payment method: 50% advance payment; full payment for delivery
• Express delivery methods: FedEx, UPS, DHL

Key Features

• Factory-terminated, ready to install – Reduces on-site crimping and pinout errors; quicker cabinet work.
• Consistent pin mapping – OEM coding helps ensure predictable channel assignments during commissioning.
• Shielded multi-core design – Typically better noise immunity for encoder, analog, or mixed I/O signals.
• Compact length – The -090 code indicates about 0.9 m, which usually keeps routing tidy in tight panels.
• Service-friendly – Labeled ends and locking connectors (where used) make swap-outs straightforward.

Technical Specifications

Specs reflect common characteristics for this type of OEM cable assembly. If you share the mating device model or connector type, we’ll verify the exact pinout before shipment.

Application Fields

• PLC and I/O marshalling inside control cabinets where short interconnects reduce clutter
• Servo drive or encoder connections that benefit from shield continuity and stable pinout
• Sensor/actuator manifolds (DIN-rail blocks) to controller interface cables
• Machine OEM builds standardizing harness lengths for repeatable assembly times

Advantages & Value

• Reliability – Factory terminations typically outlast field-made crimps and reduce intermittent faults.
• Compatibility – OEM-coded assemblies match the intended device pinout, which seems to minimize commissioning surprises.
• Cost savings – Shorter install time, fewer reworks, and less scrap from mis-crimped connectors.
• Support – We can cross-check your mating part numbers and cabinet layout before shipment.

Installation & Maintenance

• Routing – Keep separation from high-EMI sources (VFD outputs); observe bend radius and avoid sharp edges.
• Shielding & grounding – Maintain shield continuity; bond at the designated end per your site EMC standard.
• Strain relief – Use cable clamps or glands near both connectors; verify locking features are fully engaged.
• Labeling – Preserve original cable IDs; it pays off during troubleshooting and loop checks.
• Upkeep – Periodically inspect jackets and connectors for wear; clean dust from ducts and recheck torque on clamp points.

Quality & Certifications

• CE and RoHS compliant materials (typical for industrial cable assemblies)
• UL AWM-style cabling often used in control panels (model-dependent)
• Manufacturer’s warranty: 12 months from shipment

Recent customer note: “Swapped in during a cabinet tidy-up—pinout matched, and noise on our analog loop dropped noticeably.” Share your mating connector type, device part numbers, and preferred length so we can confirm the 60017.001-08-090_0201003920190505-06 fit and ship promptly.