Description
ABB 500AIM02 – 1MRB150022R001 – 1HDF-930412-X010 – Analog Input Module Set for Clean 4–20 mA / 0–10 V Acquisition
The 500AIM02 is an ABB analog input module, and the identifiers 1MRB150022R001 and 1HDF‑930412‑X010 usually point to the matched build/kit and documentation set for a specific cabinet configuration. From my experience, this is the board you install when analog channels start drifting or showing noise and you want a like‑for‑like swap that brings the rack back to steady readings—without touching field terminations or re‑engineering the bay. You might notice the AIM design plays nicely with 4–20 mA transmitters and 0–10 V sources, which makes loop validation predictable during tight outages.
Company’s Order Placement Process and Guarantees
- Warranty period: 365 days
- Delivery time: 1 week for in-stock; no more than one month at the latest
- Payment method: 50% advance payment, full payment for delivery
- Express delivery methods: FedEx, UPS, DHL
- Process: Confirm model and quantity → Proforma Invoice → Advance payment → Functional testing and packing → Final payment → Express shipment with tracking
Key Features
- Multi‑range analog inputs – Typically supports 4–20 mA and 0–10 V; ideal for standard plant transmitters and setpoint sources.
- Backplane‑powered integration – Plugs into ABB racks; addressing and comms are handled natively by the system backplane.
- Noise‑resilient acquisition – Input filtering plus proper grounding/shielding practices keep readings stable around VFDs.
- Like‑for‑like service – Drop‑in mechanics keep the terminal assembly and field wiring undisturbed in most cases.
- Build alignment – The 1MRB150022R001 and 1HDF‑930412‑X010 tags usually match cabinet documentation to mirror installed behavior.
Technical Specifications
| Brand / Model | ABB – 500AIM02 with 1MRB150022R001 / 1HDF‑930412‑X010 identifiers |
| HS Code | 853890 (Parts suitable for switchgear/control equipment) |
| Power Requirements | Typically 24 VDC via cabinet backplane (on‑board regulation) |
| Dimensions & Weight | Plug‑in I/O card; compact module; ~0.3–0.5 kg class (typical) |
| Operating Temperature | 0…55 °C cabinet ambient (typical for ABB control electronics) |
| Signal Input Types | Analog inputs, commonly 4–20 mA and 0–10 V; multi‑channel acquisition (channel count by variant) |
| Communication Interfaces | Proprietary ABB backplane; no user Ethernet/serial on module body |
| Installation Method | Rack/base‑mounted plug‑in card; field wiring remains on terminal assembly in most cases |
Application Fields
Where this module typically earns its keep:
- ABB drive/control cabinets handling pressure, level, temperature or position feedback
- Metals, mining, cement and chemical plants with critical analog loops
- Utilities and power panels integrating 4–20 mA transmitters into interlocks
- Brownfield maintenance where a like‑for‑like swap avoids rewiring and retesting
Advantages & Value
- Reliability: Replacing a suspect AIM typically stabilizes noisy channels and removes nuisance alarms tied to signal drift.
- Compatibility: Variant codes (1MRB/1HDF) keep behavior aligned with your cabinet documentation—fewer parameter tweaks.
- Downtime control: Plug‑in swap; terminal assembly stays in place, so loop checks go faster.
- Support: We can run power‑up and channel health checks (LEDs, scaling, basic linearity) and share a short report before shipment.
“Installed 500AIM02 with the R001 build. 4–20 mA loops settled immediately, scaling matched our records, and the controller stopped flagging noise warnings.” — I&C supervisor, kiln utilities panel
Installation & Maintenance
- Cabinet environment: Clean, dry, ventilated enclosure; segregate low‑level analog from VFD/motor cables.
- Handling: Use ESD protection; inspect backplane/edge contacts and seat the card fully.
- Wiring practices: Shielded twisted‑pair for analog loops; single‑point ground shields; verify loop power and polarity.
- Commissioning: Simulate low/high points, confirm scaling and alarm thresholds, review status indicators.
- Routine care: Dust removal, connector reseat checks, and periodic proof tests per site QA/SOP.
- Safety: Follow LOTO; allow any DC links to discharge; observe cabinet ESD practices.
Quality & Certifications
- Quality system: Manufactured under ISO 9001 processes (typical for ABB control electronics).
- Compliance: Suitable for installation in CE/UL compliant control panels; RoHS status may vary by production year.
- Warranty: 365‑day warranty from shipment date.
Share your rack/cabinet type, terminal assembly part number, and transmitter loop details (range, mA or V, loop power). We’ll confirm that 500AIM02 with 1MRB150022R001 and 1HDF‑930412‑X010 is a drop‑in match
Reviews
There are no reviews yet.