Description
Honeywell R7247C1001 Flame Safeguard Relay: Your Burner’s Safety Net
You know how burner failures can cascade into costly downtime? This little Honeywell workhorse sits right in the heart of your combustion system, cutting fuel supply the millisecond flame failure happens. From my experience troubleshooting industrial boilers, it’s the kind of component you don’t think about—until you’re grateful it’s there. One thing I appreciate is how it handles voltage spikes during storms; most technicians I’ve spoken with agree it’s saved them from emergency callouts.
Key Features That Actually Matter
- Fail-Safe Design – Automatically locks out on sensor faults. You’ll probably find this saves hours of diagnostic headaches during commissioning.
- Universal Flame Detection – Works with UV, IR, and cad-cell sensors right out of the box. In many cases, this avoids costly interface modules when retrofitting older systems.
- Visual Status Indicators – Bright LEDs show lockout causes without multimeters. Typically cuts troubleshooting time by half during graveyard shifts.
- DIN Rail Mounting – Snaps onto standard 35mm rails. Saves panel space compared to older terminal-block models I’ve seen crammed into tight enclosures.
Technical Specs (No Fluff)
| Parameter | Specification |
|---|---|
| Brand/Model | Honeywell R7247C1001 |
| HS Code | 8537.10.00 (Electronic Controllers) |
| Power Requirements | 24V AC/DC ±15%, 25VA max |
| Operating Temperature | -20°C to +60°C (no derating) |
| Signal Inputs | Flame rod (0-10µA), UV/IR sensors |
| Installation Method | DIN rail TS-35/7.5 or 15 (IEC 60715) |
Where It Pulls Its Weight
Picture a food processing plant’s steam boiler running 24/7 – this relay’s why a flickering flame sensor won’t shut down the entire line. Or that time I heard about a Midwest hospital avoiding carbon monoxide risks during polar vortex conditions because the R7247C caught a flame rollout failure. It’s not just for big rigs though; smaller commercial laundries use it on steam presses where safety interlocks can’t afford false trips.
Why Procurement Teams Keep Ordering It
You might notice Honeywell’s backward compatibility saves real money – it drops into panels designed for R7245 models without rewiring. The 365-day warranty feels substantial compared to competitors’ 180-day offers, and from what I’ve seen, the mean time between failures (MTBF) exceeds 100,000 hours in clean environments. Oh, and spare parts availability? Typically ships same-day if you order before noon. One plant manager told me swapping these during scheduled maintenance kept his uptime above 99.8% for two years straight.
Installation & Care Tips
Installation: Mount in NEMA 1 enclosures away from direct heat sources – I’ve seen units fail prematurely when squeezed next to contactors. Maintain 50mm clearance above/below for airflow. Use shielded cable for flame sensor leads; interference causes phantom lockouts.
Maintenance: Blow dust out quarterly with compressed air (don’t use solvents!). Check terminal torque annually – vibration loosens screws. Firmware updates? Rarely needed, but Honeywell posts patches for legacy models surprisingly often.
Quality You Can Verify
Carries UL 372, CSA C22.2 No. 24, and CE Marking for industrial environments. RoHS compliant since 2018 revisions. Our standard terms: 50% advance payment, balance before shipment. In-stock units ship in 1 week via FedEx/UPS/DHL; backorders rarely exceed 30 days. One caveat – always confirm voltage compatibility with your burner management system before ordering.
Reviews
There are no reviews yet.