SV1-10483156 Pneumatic Solenoid Valve – Manifold slice for fast, reliable on/off air control

The SV1-10483156 is a compact manifold-mounted solenoid valve designed for high-density pneumatic control. From my experience, it fits best in pick-and-place gantries, small parts assembly lines, and packaging equipment where you need quick response, low power draw, and easy maintenance. You might notice that it typically slots into a multi-station manifold, which keeps tubing tight and panel wiring simple.

Company’s Order Placement Process and Guarantees

• Warranty: 365 days
• Delivery time: 1 week for in-stock items; no more than 1 month at the latest
• Payment: 50% advance payment, full payment for delivery
• Express options: FedEx, UPS, DHL

Key Features

• Manifold-mounted format – Saves panel space and reduces fittings; ideal for modular pneumatic banks.
• Low power coil – Typically 24 VDC with low wattage draw, which keeps heat and power budgets in check.
• Fast response – Snappy switching for high-cycle applications like sorters and carton erectors.
• Service-friendly – Coil/valve can usually be swapped without disturbing the manifold, cutting downtime.
• Clean, dry air compatible – Works reliably with standard plant air when filtered and lubricated as required.
• IP-rated when used with sealed connector – In most cases, DIN or M12 connectors with gaskets achieve splash resistance in cabinets.
• Common valve functions – 3/2 or 5/2 configurations available in many builds; single or double solenoid variants are typical.

Technical Specifications

One thing I appreciate is how forgiving this valve is in mixed-manufacturer manifolds—compatibility is often straightforward if the cavity and coil specs match. A packaging client told us, “We swapped two stations during a rush order and were back in operation within an hour,” which seems to be a common outcome when the base pattern is standard.

Related or Supporting Products

• Manifold bases (SV-series compatible) – Multi-station aluminum bases with end plates and common supply/exhaust galleries.
• Coil connectors – DIN 43650-A plugs with LED and surge suppression; or M8/M12 cordsets for compact wiring.
• Air preparation units (FRL) – 5 μm filter, regulator, and lubricator sets to maintain clean, stable supply pressure.
• Silencers/Mufflers – Sintered bronze or polymer mufflers for exhaust ports to reduce noise and oil mist.
• Comparable valve families – SY- or SV-style manifold valves from mainstream vendors; in many cases, a 3/2 or 5/2 function with 24 VDC coil is a practical swap if the base and flow spec match.

Installation & Maintenance

• Panel/Cabinet: Mount the manifold on a rigid DIN panel or base plate. Provide ventilation; avoid heat sources and oil spray.
• Air Quality: Use clean, dry air per ISO 8573-1 Class 4 or better; 5–40 μm filtration is typical. Drain condensate frequently.
• Wiring: 24 VDC supply with proper polarity if a diode is built in. Use LED/suppressed connectors to protect PLC outputs.
• Tubing & Ports: Keep runs short to improve response. Verify P, A/B, and R porting per the manifold marking.
• Start-up checks: Leak test at operating pressure; confirm actuation and manual override function (if present).
• Routine maintenance: Inspect coil temperature, check coil resistance annually, clean exhaust silencers, and replace seals if cycling drifts.
• Firmware/I/O modules: If the manifold uses an I/O slice or node, keep firmware current and observe node addressing rules.

Quality & Certifications

• Typically conforms to CE requirements for EMC/Low Voltage when installed with compliant connectors
• RoHS and REACH compliant components, depending on specific coil/connector variant
• UL recognition for coils is available on many variants used in North America
• Standard manufacturer warranty supported by our 365-day service commitment

If you’re matching this valve into an existing manifold, share the base pattern and coil spec. In many cases, that’s all we need to confirm fit and get you a quick shipment.