Honeywell TC-CCR014 (97197975-A01) – Rack Control/Carrier Card for TPS/Experion DCS Maintenance

The Honeywell TC-CCR014, assembly 97197975-A01, is a plug-in DCS rack card used across many Honeywell TPS/Experion installations. From my experience, it functions as a control/carrier card within the Honeywell chassis, linking controller electronics to the backplane bus and enabling stable communication with adjacent modules. Plants typically keep one or two on the shelf because it’s a quick swap during outages and helps shorten recovery time after a hardware fault.

You might notice that this “TC-” family board prioritizes robust backplane connectivity over direct field I/O, which makes it a dependable piece for sustaining legacy racks or mixed-generation Experion/TPS systems. It’s common in refining, petrochem, power, and pulp & paper where uptime matters and spare part availability seems to be the deciding factor.

Order Placement Process and Guarantees

• Warranty: 365 days
• Lead time: 1 week if in stock; no more than one month at the latest
• Payment: 50% advance payment; full payment prior to delivery
• Express options: FedEx, UPS, DHL

Key Features

• System compatibility: Designed for Honeywell TPS/Experion racks, providing dependable backplane interfacing rather than direct field I/O.
• Backplane-powered: Draws power via the system chassis; keeps wiring tidy and maintenance simple.
• Stable operation: Built for 24/7 service in demanding environments; typically meets industrial temperature and EMC standards.
• Service-friendly design: Plug-in card with captive fasteners; ESD-safe handling and straightforward replacement in most cases.
• Revision traceability: 97197975-A01 assembly identifier helps match installed base and documentation.
• Redundancy workflows: Often used within redundant controller architectures; swap planning depends on site strategy and rack/controller setup.

Technical Specifications

Related or Supporting Products

• Honeywell TC-CCR013: Earlier, closely related card used in similar racks; many sites treat it as an alternate depending on revision compatibility.
• Honeywell TC-CCR016: Later-generation variant in the same family; typically selected during phased upgrades or mixed racks.
• Honeywell TC-FTEB01: Network interface/bridge module used in Experion environments; not a 1:1 substitute, but often found in the same cabinets.
• Honeywell power and backplane components (various TC-**** models): Pairing the TC-CCR014 with the correct rack, backplane and power supply ensures stable operation and proper grounding.

Note: Selection between TC-CCR013, TC-CCR014, and TC-CCR016 typically depends on installed controller type and rack revision. If you share your current controller and chassis PNs, we can verify drop-in compatibility before shipment.

Installation & Maintenance

• Cabinet & environment: Install in a clean, dry control cabinet (IEC/UL-rated); maintain airflow with at least 25 mm clearance at card fronts; avoid direct heat sources.
• Power & grounding: Use the approved Honeywell backplane and power supply. Verify cabinet ground continuity; keep shield terminations consistent with site standards.
• Handling & ESD: Wear an ESD wrist strap; transport in antistatic packaging. From my experience, most “mystery” card failures trace back to improper handling.
• Replacement procedure: Move the controller to a safe state or to the redundant path (if applicable). De-energize the slot when required. Insert firmly and secure both fasteners.
• Routine care: Quarterly dust removal with dry, oil-free air at low pressure; visual check of connectors and front panel. Firmware is not usually user-managed on this carrier, so focus on physical condition and diagnostics.
• On-site feedback (typical): “We swapped a TC-CCR014 during a weekend window; total rack downtime was under 30 minutes after verification.”

Quality & Certifications

• Certifications: CE marking and UL recognition are typical for Honeywell DCS rack cards; RoHS compliance may vary by revision.
• Manufacturing standards: Built to Honeywell’s industrial quality processes for continuous operation.
• Warranty support: 365-day warranty, with replacement or repair according to evaluation.