ABB UGTMEM-01SB47SR – Industrial Memory Module for UGT-Series Controllers and Gateways

The ABB UGTMEM-01SB47SR is a factory memory module typically used with ABB UGT-series controller/gateway platforms to store firmware packages, configuration sets, and event logs. From my experience, teams keep this module on hand to speed up commissioning and field replacement—swap the controller, plug in the UGTMEM, and your validated configuration is right there. You might notice that it’s designed for cabinet environments and service work where predictable data retention and rugged connectors matter more than consumer-grade capacity numbers.

Company’s Order Placement Process and Guarantees

• Warranty: 365 days
• Delivery: 1 week for in-stock; no more than one month at the latest
• Payment: 50% advance payment; full payment before delivery
• Express options: FedEx, UPS, DHL

Key Features

• Industrial-grade non-volatile storage – Holds firmware images, parameter sets, and logs even when the controller is powered down.
• Host-powered design – No external supply; the module draws power from the UGT backplane/edge connector for a simpler wiring layout.
• Service-friendly swap – In most cases, technicians move a validated configuration between identical UGT hosts within minutes, reducing downtime.
• Ruggedized build – Typically includes vibration-resistant latching and ESD-protected contacts suitable for switchgear and process cabinets.
• Data retention and integrity – Appears to be optimized for long retention and controlled write cycles; ideal for event archiving and versioned firmware.
• Traceability – Labeling supports part/version identification, which helps maintenance teams keep audit trails clean.
• Preload service (on request) – Many users have us preload firmware and baseline configs so the module is ready to slot into your asset.

Technical Specifications

Related or Supporting Products

• ABB UGTCPU-01 – CPU/controller module for the UGT platform; pairs with UGTMEM for firmware and configuration storage.
• ABB UGTCOM-02 – Communication expansion (for Ethernet/fieldbus connectivity such as Modbus/TCP, depending on host).
• ABB UGTPSU-24 – 24 VDC power supply module intended for UGT racks and small cabinets.
• ABB UGTMEM-02SB47SR – Higher-capacity or newer-revision memory option for extended logging or multi-image firmware sets.

Quick note from the field: a maintenance supervisor at a food plant told me they keep two UGTMEM modules preloaded—one lives with the active controller and the other rides in the service kit. When a controller is swapped, they’re back online in under 20 minutes.

Installation & Maintenance

• Cabinet environment – Install in a clean, dry control cabinet with adequate ventilation; adhere to the host’s protection rating and spacing. Avoid condensation and corrosive atmospheres.
• Power-down insertion – Power off the UGT host before inserting or removing the UGTMEM module. Use an ESD wrist strap and handle by the edges.
• Wiring – No external wiring required; the unit mates with the internal connector and is retained by the designated latch or cover.
• Backup routine – Periodically export configuration backups to your maintenance server. Version your firmware images to keep rollback options clear.
• Inspection – Every 6–12 months, check latches and connector alignment; clean dust with dry air (low pressure). Do not use solvents.
• Firmware lifecycle – When updating, validate the new image in a test cell first. From my experience, most teams stage the image on UGTMEM, then perform the host update during a scheduled outage.

Quality & Certifications

• Certifications – CE and RoHS compliance are typical for ABB control modules; UL/cUL recognition may apply depending on the final assembly.
• Manufacturing – Produced under ISO 9001 quality systems.
• Warranty – 365-day warranty as stated above.

If you need us to preload site-specific firmware or clone an existing configuration onto UGTMEM-01SB47SR, share the version set and we’ll stage it so your team can go straight to installation.