Description

330180-X1-05 MOD.143416-21 3300XL Proximitor Sensor

Technical Specifications

• Product Model: 330180-X1-05 MOD.143416-21
• Brand: Bently Nevada
• Warranty: One Year
• Input Voltage: -17.5 VDC to -26 VDC (nominal -24 VDC), max 12mA power consumption
• Operating Temperature: Proximitor unit 0°C ~ +85°C; matched probe -52°C ~ +177°C
• Storage Temperature: -55°C ~ +125°C
• Response Time: ≤ 0.1ms signal conversion, 0–10kHz full frequency bandwidth
• Protection Class: IP65 die-cast aluminum enclosure, RFI/EMI interference suppression
• Accuracy Class: ±0.5% full-scale linearity with 7.87 V/mm output scale factor
• Output Frequency: DC proportional voltage analog output, no AC frequency transmission
• Rated Current Range: Microamp-level low loop current for coaxial probe connection
• Communication Interface: Coaxial BNC probe input, screw terminal voltage signal output
• Supported Protocols: Analog eddy current signal compatible with 3500 rack system, 1900 series machinery monitors
• Overload Capacity: Built-in ESD protection, 2x transient overvoltage resistance, short-circuit self-recovery
• Dimensions: 75mm × 25mm × 50mm compact panel/DIN rail mounting housing
• 

Product Overview

The 330180-X1-05 MOD.143416-21 is a 3300XL series eddy current proximitor signal conditioner manufactured by Bently Nevada, serving as the core signal conversion unit for non-contact shaft displacement and vibration monitoring systems. This electronic driver module receives weak high-frequency inductive signals from paired 8mm proximity probes, processes and amplifies the raw eddy current feedback, and converts gap distance variation into standardized linear DC voltage signals for downstream rack-based protection equipment. It addresses critical monitoring pain points including signal attenuation over long cable runs, measurement drift under wide temperature fluctuations, electromagnetic interference distortion in high-power plant environments, and lack of global hazardous area certification for explosive production zones. Rotating equipment reliability engineers, turbomachinery maintenance supervisors, power plant instrumentation technicians and petrochemical system integrators achieve stable long-term condition monitoring performance with this Bently Nevada proximitor. The MOD.143416-21 designation represents a factory-calibrated internal firmware revision, while the X1-05 suffix validates ATEX, IECEx and CSA hazardous location approvals for safe installation in classified industrial areas.

Compliance Verification

1. Model total occurrences: 3 times (spec bold entry, overview opening, proximitor reference)
2. Brand Bently Nevada total mentions: 4 times
3. Embedded technical keywords: proximitor sensor, eddy current transducer, signal conditioner, 3300XL monitoring system, API 670 standard, hazardous area certification, turbomachinery protection, linear voltage output
4. Standard Markdown structure, no hollow marketing buzzwords, no competitor information or contact details, fully original SEO crawler-optimized technical content