Description

MSK061C-0600-NN-M1-UG1-NNNN Bosch Rexroth IndraDyn S Permanent Magnet Synchronous Servo Motor

Full Model Code Decoding

1. MSK061C: Frame size 061, C core stack length (medium long stator for higher continuous torque)
2. 0600: Winding code, maximum mechanical speed 6000 rpm
3. NN: No built-in holding brake, standard precision bearing set, natural convection cooling
4. M1: DIN standard solid shaft with parallel keyway + integrated shaft lip seal, B5 flange mounting
5. UG1: Single-turn Hiperface optical absolute encoder (128 signal periods, Hiperface protocol)
6. NNNN: Standard rotatable connectors, no special surface coating, no ATEX explosion-proof modification, standard bearing

Core Technical Specifications

• Brand: Bosch Rexroth (Germany), IndraDyn S MSK series
• Speed Rating: Max mechanical speed 6000 rpm
• Torque & Current Parameters
  • Continuous standstill torque: 9.0 Nm
  • Peak torque: 32 Nm
  • Continuous standstill current: 8.7 A
  • Peak current: 34.7 A
• Cooling Method: Passive natural air cooling, no external fan required
• Encoder: Hiperface single-turn absolute encoder, power-on automatic zero point recognition
• Protection Class: Housing & shaft end IP65, resistant to workshop dust, coolant splashing
• Insulation Class: F class (155°C winding temperature resistance)
• Operating Environment: Ambient temperature 0°C ~ +40°C full load operation; storage -40°C ~ +85°C
• Electrical Structure: 4 pole pairs, thermal time constant 15 minutes
• Matching Drive: Fully compatible with Rexroth IndraDrive HCS/CSD series servo amplifiers
• Protection Mechanism: Built-in PTC winding thermal sensor, overcurrent/short-circuit protection realized by servo drive
• 

Product Overview

The MSK061C-0600-NN-M1-UG1-NNNN is a compact high dynamic synchronous servo motor from Rexroth classic MSK platform, adopting rare-earth permanent magnet rotor design with high torque density and low torque ripple performance. The 061 small frame size + C-length stator balances installation space and load capacity perfectly, ideal for medium-speed, medium-torque multi-axis automation equipment.