Description

ABB 3BSE011000R1 CI630 AF100 Communication Interface Module

Technical Specifications

• Part Number: 3BSE011000R1 (Type: CI630)ABB Group
• Brand: ABB
• Warranty: One Year
• Input Voltage: Powered by Advant Master rack backplane, no external field power supply
• Operating Temperature: 0 °C ~ +55 °C cabinet‑mount installation
• Storage Temperature: ‑20 °C ~ +70 °C
• Response Time: AF100 fieldbus deterministic real‑time data exchange for DCS process control
• Protection Class: IP00 plug‑in rack‑mount module; metal housing; RoHS‑exempt legacy industrial spareABB Group
• Accuracy Class: Communication gateway, no process measurement channels
• Output Frequency: Not applicable; AF100 coaxial‑bus communication
• Rated Current Range: Consumes power from system backplane; no field‑load drive capability
• Communication Interface: Dual coaxial AF100 bus connectors with integrated modem; backplane mating connector for Advant Master rack; front‑panel diagnostic LED indicatorsABB Group
• Supported Protocols: ABB AF100 (Advant Fieldbus 100); compatible with Advant Master / Advant OCS DCS platform
• Overload Capacity: Coaxial‑circuit surge suppression; bus‑fault diagnostic reporting; hardware watchdog for communication link monitoring
• Dimensions: 40 mm × 273 mm × 252 mm; weight approx 1.42 kg

Product Overview

The 3BSE011000R1 (CI630) is an AF100 fieldbus communication interface module for ABB Advant Master / Advant OCS distributed control systems. Equipped with an integrated modem and coaxial connectors, it acts as the gateway between the DCS controller rack and remote AF100 I/O stations. It transfers real‑time process variables, interlock status and control commands over coaxial AF100 fieldbus.

This module addresses DCS‑system challenges: long‑distance coaxial‑based distributed I/O networking, robust industrial‑bus anti‑interference performance, and drop‑in spare‑part compatibility for legacy Advant‑series DCS retrofit projects. Status LEDs allow fast on‑site troubleshooting of bus‑link faults. DCS control engineers, power‑plant and petrochemical‑site maintenance technicians and system‑retrofit integrators benefit most. It applies for power‑utility, pulp‑and‑paper and petrochemical plant DCS control systems. (Word count:177)

Key Application Notes

• Exclusively for ABB Advant Master / Advant OCS racks; cannot operate standalone; must connect with AF100 coaxial remote I/O stations
• Uses coaxial cable for AF100 bus wiring; correct cable‑termination resistance must be set at both bus ends
• Not hot‑swap capable: rack power shall be removed before module replacement
• RoHS‑exempt legacy hardware; original production is obsolete; widely used as aftermarket maintenance spare partABB Group
• Conformal‑coated variant available for high‑humidity, high‑contaminant cabinet environments
• Origin: Sweden; exchange reference EXC3BSE011000R1ABB Group