Description

SCANLAB INTELLISCANDE14‑405NM Fully‑Digital UV Galvanometer Scan Head

Technical Specifications

• Product Model: INTELLISCANDE14‑405NM
• Brand: SCANLAB (Germany)
• Warranty: One Year
• Input Voltage: 30 VDC, max 6 A
• Operating Temperature: 15 °C ~ +35 °C industrial processing environment
• Storage Temperature: ‑20 °C ~ +60 °C
• Response Time: Step‑response 0.45 ms (1% full‑scale deflection); tracking error ≤130 μs
• Protection Class: IP20 standard housing; optional sealed IP65 variant
• Accuracy Class: Repeatability ＜2 μrad RMS; long‑term low thermal driftScanlab
• Output Frequency: Max vector scan speed up to 10 m/s
• Optical Aperture: 14 mm
• Target Laser Wavelength: 405 nm UV, high‑reflectivity UV‑optimized mirror coatings
• Max Optical Scan Angle: ±0.35 rad (±20°) per axis
• Control Interface: SL2‑100 digital interface, 20‑bit position resolution; compatible with RTC5 / RTC6 laser controller boards
• Drive Electronics: Built‑in iDRIVE fully‑digital servo with digital encoder position feedback
• Cooling: Convection standard; optional water‑cooling for high‑duty‑cycle UV workloads
• Dimensions / Weight: 175 mm × 114 mm × 147 mm; approx 3.0 kgScanlab

Product Overview

The INTELLISCANDE14‑405NM is a high‑performance fully‑digital 2‑axis galvanometer scan head from SCANLAB intelliSCAN‑DE series, specially optimized for 405 nm ultraviolet laser processing. Digital encoder feedback eliminates analog detector drift, delivering excellent long‑term positioning stability and minimal dither noise for high‑precision UV micromachining. The UV‑specialized mirror coatings maintain >98% reflectivity at 405 nm, reducing thermal absorption and mirror degradation under continuous UV laser irradiation. Integrated iDRIVE digital servo electronics support multiple user‑selectable tuning profiles to balance scan speed and marking quality. It connects to SCANLAB RTC series controller boards via SL2‑100 digital bus for deterministic high‑speed laser beam positioning. Comprehensive internal diagnostic functions monitor temperature, drive status and fault conditions for fast production‑line troubleshooting.

This scan head addresses high‑end UV laser‑processing challenges: digital encoder‑based long‑term stability, dedicated 405 nm UV optical coating, high‑speed dynamic performance, drop‑in spare‑part compatibility for existing INTELLISCAN‑DE series production‑machine retrofit‑maintenance projects. Laser‑processing engineers, semiconductor‑fab and electronics‑manufacturing maintenance technicians and retrofit integrators benefit most. Typical applications: PCB UV direct imaging, semiconductor patterning, micro‑material ablation, high‑precision UV marking and optical‑component micro‑processing.

Key Application Notes

‑Galvanometer scan‑head unit; cannot operate standalone. Requires matched 405 nm UV laser source, SCANLAB RTC controller board and F‑theta objective lens. ‑‑405NM suffix defines UV‑mirror coating variant; 1064 nm / 532 nm optical variants cannot cross‑replace. ‑Avoid excessive ambient‑temperature fluctuation to minimize thermal‑drift influence on positioning accuracy. ‑Not hot‑swap capable: cut off 30 VDC drive power before scan‑head disassembly or replacement. ‑Original OEM production active; original new and aftermarket surplus/refurbished spare parts are available. ‑Follow SCANLAB intelliSCAN‑DE hardware manual for grounding, tuning‑profile selection, laser‑beam alignment and cooling‑system configuration.