Description
Product Overview The SC311S-100-ASSY is an infrared combustible gas sensor assembly for the Net Safety Millennium II gas detection system. It adopts dual-beam IR technology to measure hydrocarbon gases within 0–100% LEL, and it works paired with M21, M22 or M2B transmitters. The “S” suffix stands for 316 stainless steel housing. This smart sensor comes pre-calibrated, automatically recognized by the transmitter after installation, widely deployed on offshore platforms, refineries and chemical plants for flammable gas safety monitoring.
Technical Specifications
- Manufacturer: Emerson Net Safety
- Model: SC311S-100-ASSY
- Device Type: IR combustible gas sensor assembly
- Detection range: 0–100% LEL
- Measured gases: Methane, propane, butane, ethylene and other hydrocarbons, field-selectable gas curves
- Response time: T90 ≤ 11 seconds
- Accuracy: ±2% LEL below 50% FS; ±5% LEL above 50% FS
- Repeatability: ±2% LEL full scale
- Enclosure: 316 stainless steel, IP64 / NEMA 4X
- Operating temperature: -40°C ~ +75°C
- Humidity: 0–95% RH non-condensing
- Communication: Digital smart interface to Millennium II transmitters
- Max remote distance: Up to 600 m (2000 ft)
- Weight: Approx. 0.74 kg
- Certifications: FM, CSA, IECEx, ATEX, Class I Div 1, Zone 1 hazardous area approval
- Feature: Poison-resistant design, 5-year warranty, typical service life 8–10 years, only annual calibration required
Differentiation Notes SC311A-100-ASSY is the aluminum version, while SC311S-100-ASSY uses stainless steel for corrosive environments. It is different from SC310 series catalytic bead sensors; IR sensors avoid catalyst poisoning by silicone, lead and sulphur compounds. It cannot operate independently and must be matched with Millennium II transmitter units such as M21-A-S.








Reviews
There are no reviews yet.