Description
Product Overview The 176449-01V is the front card assembly of the 3500/40M 4‑channel Proximitor Monitor, the SIL-capable upgraded version for the Bently Nevada 3500 machinery protection rack. The suffix “V” denotes a specific hardware / firmware variant revision of the base part 176449-01. It receives signals from eddy‑current proximity probe systems and measures radial shaft vibration, thrust position, eccentricity, differential expansion and REBAM bearing wear. It executes configurable Alert / Danger alarm voting, sends trip votes to relay modules, and streams static values plus waveform / orbit data to System 1 condition monitoring software, complying with API 670 for turbines, compressors and critical rotating equipment.
Technical Specifications
- Manufacturer: Bently Nevada (Baker Hughes)
- Model: 176449-01V, belongs to 3500/40M
- Device Type: SIL-rated 4‑Channel Proximitor Monitor Front Card
- Channel count: 4 independent proximity input channels
- Supported transducers: 3300 XL eddy‑current proximity probe systems
- Measurement modes: Radial vibration, thrust position, eccentricity, differential expansion, REBAM
- Probe excitation: Onboard -24 VDC transducer power
- Buffered output: BNC test point per channel for raw transducer signal
- Frequency response: 4 Hz to 4000 Hz, programmable filtering
- Accuracy: ±0.25% full scale typical
- Diagnostics: Probe open, short, out‑of‑range, watchdog fault detection
- Indicators: OK, TX/RX, Bypass LEDs on front panel
- Backplane: 3500 proprietary rack bus
- Power: Powered from rack backplane
- Operating temperature: -30°C ~ +65°C
- Storage temperature: -40°C ~ +85°C
- Humidity: 5% – 95% non‑condensing
- Form factor: Full‑height hot‑swap plug‑in monitor card, paired with rear PIM I/O board
- Weight: Approx. 0.92 kg
- Certifications: CE, UL, SIL 2 capable
- Feature: TMR voting support, latching alarms, waveform capture, configured via 3500 Rack Configuration Software
Differentiation Notes Base part 176449-01 is the standard 3500/40M front card; -01V marks a special revision build. It must pair with matching rear PIM I/O module such as 125680‑01 for internal termination. Distinguish it from the legacy non‑SIL 3500/40 (176449‑01 without M). It is not interchangeable with seismic velocity monitors like 3500/42. This module is still supported for spare procurement for critical protection racks.







Reviews
There are no reviews yet.