Description
Product Overview The AN-X4-AB-DHRIO is a multi-mode gateway from ProSoft, bridging EtherNet/IP to Allen‑Bradley DH+ (Data Highway Plus) and Remote I/O networks. It supports selectable operating modes: DH+ router, Remote I/O scanner, Remote I/O adapter, drive interface and HMI interface. It enables modern ControlLogix, EtherNet/IP masters and HMI software to communicate with legacy PLC‑5, SLC 500, PanelView, Flex I/O and RIO adapters, widely used for phased migration of old Rockwell automation systems in power, water and industrial plants.
Technical Specifications
- Manufacturer: ProSoft Technology
- Model: AN-X4-AB-DHRIO
- Device Type: EtherNet/IP to DH+ / Remote I/O Gateway
- Ethernet port: 1 × 10/100BASE-TX RJ45 (EtherNet/IP)
- Legacy network: 3-pin Phoenix terminal for DH+ / RIO
- DH+ baud rates: 57.6 kbps, 115.2 kbps, 230.4 kbps
- Supply voltage: 12–24 VDC
- Current draw: 240 mA @12 VDC, 120 mA @24 VDC
- Max power dissipation: 2.9 W
- Storage: MicroSD slot for configuration backup and firmware
- Configuration: Built-in web server for setup, diagnostics and log viewing
- Mounting: DIN rail
- Operating temperature: 0°C ~ +50°C
- Humidity: 5% – 95% non‑condensing
- Dimensions: 107 × 98 × 34 mm
- Weight: Approx. 0.25 kg
- Certifications: CE, UL
- Feature: Supports RSLinx access to DH+ PLCs, message routing, built-in diagnostic counters, drop-in upgrade replacing older AN-X2-AB-DHRIO
Differentiation Notes AN-X4-AB-DHRIO is the updated AN-X4 generation, superseding AN-X2-AB-DHRIO. It differs from MVI56E-MCM you checked earlier which is a ControlLogix backplane Modbus module, not a standalone DH+/RIO gateway. This series remains supported for spare procurement; available as original new, NOS and refurbished stock.







Reviews
There are no reviews yet.