Description
Product Overview The 5417-1251 is a galvanically isolated USB to UART (RJ45) configuration interface cable for Woodward easYgen, MFR, DTSC and LS5 series generator controllers. It creates a virtual COM port on PC for parameter setup, live monitoring, disturbance data upload and firmware download, used with Woodward speed monitors such as MISP-2 series you checked previously. The RJ45 connector carries serial UART signal, not Ethernet.
Technical Specifications
- Manufacturer: Woodward
- Model: 5417-1251, alias: DPC-USB
- Device Type: Isolated USB configuration adapter cable
- PC side: USB Type-A, USB2.0 full speed
- Device side: RJ45 (UART serial)
- Baud rate: Up to 115.2 kbps
- Isolation: 1500V RMS galvanic isolation
- Power: Bus-powered from USB, <2W consumption
- Supported devices: easYgen-1500/2000/3000, MFR-300, DTSC-200, LS5
- Software: Woodward Toolkit
- Cable length: 0.5m
- Enclosure: Small plastic isolator housing
- Operating temperature: −20°C ~ +70°C
- Humidity: 5% – 95% non‑condensing
- Weight: Approx. 60 g
- Certifications: CE, UL
Differentiation Notes 5417-1251 = DPC-USB isolated serial config cable; 5417-557 is the older DPC-1 RS232 version. This RJ45 port is serial only and cannot plug into standard Ethernet switch. Available as original new, NOS and refurbished spare parts.








Reviews
There are no reviews yet.