Description
Cameron AAP3798102-00130 – OEM Actuator/Valve Assembly for Oil & Gas Control Packages
From my experience with Cameron part numbering, AAP3798102-00130 is an OEM assembly-level spare typically supplied for Cameron valve actuation or control packages. It’s designed as a direct, like-for-like replacement to keep wellhead and manifold equipment online with minimal rework. If your tag plate or MTO lists this exact code, you’re looking at a drop-in OEM component built to match Cameron’s original specifications, including sealing geometry and mounting interfaces.
Order Placement Process & Guarantees
- Warranty: 365 days
- Lead time: 1 week if in stock; no more than 1 month at the latest
- Payment: 50% advance payment; full balance before delivery
- Shipping: FedEx, UPS, or DHL express
One thing I appreciate is how straightforward the verification is. Share your equipment tag/photo and any Cameron BOM reference; we’ll cross-check the revision against AAP3798102-00130 to avoid supersession mismatches. It saves headaches during shutdown windows.
Key Features
- Genuine Cameron fit-up: Built to match the OEM interface, so mounting and linkage alignment remain intact.
- Field-proven sealing package: Low leakage rates in typical production environments; suitable for continuous duty.
- Service-optioned materials: Sour-service compatible materials (e.g., NACE-conforming) can be supplied when specified.
- Minimal downtime: Direct replacement cuts commissioning time—technicians usually reuse existing control line routing.
- Traceability: Supplied with identifiable part/lot data for audit trails and maintenance history.
- Lifecycle support: Availability of associated gaskets, fasteners, and position-feedback accessories where applicable.
Technical Specifications
| Brand / Model | Cameron AAP3798102-00130 |
| HS Code | 8481.90 (Parts for valves) – indicative; final classification may depend on configuration and destination |
| Power Requirements | None for mechanical/hydraulic actuation; uses line pressure from the control system (no on-board electrical power) |
| Operating Temperature | Typically −20°C to +82°C (oilfield environments), subject to seal and material selection |
| Signal I/O Types | Hydraulic/pneumatic control ports; optional mechanical or proximity switch feedback when specified |
| Communication Interfaces | Not applicable (no digital comms by default) |
| Installation Method | OEM drop-in replacement on Cameron valve/actuator mountings; follow Cameron drawing and torque specs |
Application Fields
In many cases, this assembly is used in:
- Surface wellhead and Christmas tree valve actuation (production, test, and injection services)
- Choke/kill manifolds and production flowline isolation
- Separator and gathering station valve packages
- Skid-mounted control panels where OEM Cameron actuators are specified
A maintenance supervisor from a Middle East operator told us this part “dropped straight onto the yoke with no shim work,” which lines up with what we typically see during brownfield swaps.
Advantages & Value for Procurement
- Reliability: OEM geometry and sealing means predictable performance under high-cycle conditions.
- Compatibility: Matches Cameron interfaces—no adapter plates or custom linkages in most cases.
- Cost & Time Savings: Short lead times and zero re-engineering help avoid extended shutdowns.
- Traceable Supply: Documentation provided for QA audits and spare parts records.
- Support: Assistance with part verification (nameplate, BOM, and legacy supersession checks).
Installation & Maintenance
- Environment: Install in a clean, ventilated cabinet or skid area when panel-mounted; protect ports from debris during fit-up.
- Mounting: Align to the valve stem/yoke per Cameron drawings; torque fasteners to spec and verify stroke travel.
- Wiring/Controls: If fitted with limit switches, use shielded 24 VDC instrument loops; confirm continuity and fail-safe logic.
- Hydraulics/Air: Flush control lines; use clean, dry instrument air or filtered hydraulic fluid per OEM grade.
- Safety: Lockout/tagout, depressurize lines, and confirm zero energy state before removal/installation.
- Routine Care: Inspect seals and linkages quarterly; check for weep/leak; calibrate position feedback annually if equipped.
Quality & Certifications
- Quality System: Manufactured under ISO 9001 quality management in typical OEM supply chains.
- Industry Conformance: Material and service options available to align with API 6A and NACE MR0175/ISO 15156 requirements when specified.
- Compliance: CE/UL/RoHS generally not applicable for purely mechanical/hydraulic assemblies; electrical accessories can be supplied with appropriate approvals on request.
- Warranty: 12 months (365 days) against manufacturing defects.
You might notice that part numbers like AAP3798102-00130 sometimes carry revision-specific details. If you share your existing tag photo, we can confirm compatibility and advise if a superseded code should be used. That way your team receives exactly what the valve requires the first time.
Reviews
There are no reviews yet.