Eaton XVS-440-10MPI-1-1U – 10.4” HMI panel for Siemens S7 (MPI) connectivity and multi-protocol machine interfaces

The Eaton XVS-440-10MPI-1-1U is a 10.4-inch operator interface that’s commonly used on packaging lines, conveyors, mixers, and legacy S7-300/400 cells where an MPI port is still the most practical way to talk to the PLC. From my experience, this XV400-series unit strikes a nice balance: a clear VGA display, robust 24 VDC power, and the right mix of ports—so you can bridge older MPI networks while still having Ethernet for plant integration.

Our Order Placement Process and Guarantees

• Warranty: 365 days
• Lead time: 1 week when in stock; no more than 1 month at the latest
• Payment terms: 50% advance payment; full payment prior to delivery
• Express delivery: FedEx, UPS, DHL

Key Features

• 10.4” TFT with resistive touch – A practical VGA (640×480) screen that’s easy to read on the factory floor and simple to operate with gloves.
• Native MPI connectivity – Direct link to Siemens S7-300/400 via MPI; ideal for upgrades where the PLC stays but the HMI gets refreshed.
• Industrial-grade build – Front panel protection typically meets IP65 when properly mounted, so washdowns and dust aren’t a problem in most cases.
• Multiple comms on board – You’ll typically get Ethernet, serial (RS‑232/485), USB and the MPI port—handy for service laptops and plant networks.
• 24 VDC power, panel mount – Standard control-cabinet power and clamp mounting keep installation straightforward.
• Flexible software options – Commonly used with Eaton GALILEO/CoDeSys-based runtimes and drivers for Siemens S7 over MPI; seems to be well supported in mixed-brand plants.

Technical Specifications

Where it’s typically used

OEM machine builders and maintenance teams drop this HMI into existing cabinets when the PLC is Siemens S7 and MPI is still in play—bottling lines, small extruders, chillers, even test stands. One thing I appreciate is how service techs can use the serial or USB ports for quick firmware loads while the MPI link to the PLC stays intact. A customer in food packaging mentioned they swapped to this unit because the front IP rating and 10.4” size matched their existing cutout with minimal rework.

Related and Supporting Products

• Eaton XV-102-10 – 10” class HMI with a slimmer form factor; fewer legacy ports but more modern performance in many cases.
• Eaton XV-303-10 – Capacitive multi‑touch successor with faster CPU and web features; ideal if you’re moving away from MPI to Ethernet.
• Eaton XV-460 series – Higher performance XV family panels for larger projects or heavier graphics.
• MPI/Profibus cables and connectors – Shielded DB9 and 90° Profibus connectors to maintain signal integrity.
• 24 VDC power supplies (Eaton PSG series) – Stable DIN-rail supplies sized to at least 2 A headroom for panel accessories.

Installation & Maintenance

• Cabinet & mounting – Use a clean, flat panel; keep gasket continuous for IP65 at the front. Allow ~60–80 mm depth clearance behind the panel for cabling and bend radii.
• Power & grounding – 24 V DC with a dedicated, fused feed. Bond the HMI’s ground to the panel; keep DC commons clean to avoid touch noise.
• Wiring – Route MPI/Profibus and RS‑485 in shielded twisted pairs, with the shield bonded at a single point. Maintain Ethernet away from VFD leads.
• Ventilation – Keep ambient 0…50 °C; avoid direct sun on the bezel. Add cabinet fans or a heat exchanger if the enclosure runs warm.
• Routine care – Wipe the screen with a soft, non‑abrasive cloth; no solvents. Calibrate the resistive touch if you notice offset touches.
• Software upkeep – Back up the application and any recipe data to SD or over Ethernet. Apply firmware updates during scheduled downtime only.

Quality & Certifications

The XV400 family typically carries CE and UL/cUL approvals and is manufactured under ISO 9001 processes. RoHS compliance is standard on current inventory. Manufacturer warranty is standard for the series; we back this item with a 365‑day warranty on supply.