FOXBORO P0904HN-LZS-1500-3FOX – Pre-terminated Interconnect Cable for I/A Series FBM-to-TA Wiring

The FOXBORO P0904HN-LZS-1500-3FOX is a factory-terminated interconnect cable typically used to link I/A Series FBM modules to their Termination Assemblies (TAs) in control cabinets. From my experience, this is the sort of harness plants choose when they want repeatable, low-error wiring in brownfield upgrades or fast commissioning jobs. The “LZS-1500” designation points to a ~1.5 m length, which seems to be the sweet spot for panel-to-marshaling runs without messy slack.

You might notice that pre-terminated FOXBORO assemblies like this reduce panel time dramatically: no hand-crimping in a tight cabinet, fewer landing mistakes, and consistent shielding practices. One thing I appreciate is how these assemblies fit neatly into standard routing paths, so techs can focus on loop checks instead of rework.

Order Placement Process and Guarantees

• Warranty: 365 days replacement coverage
• Delivery: 1 week if in stock; no more than one month at the latest
• Payment: 50% advance payment; full payment prior to delivery
• Express options: FedEx, UPS, DHL

Key Features

• Pre-terminated connectors – Reduces wiring errors and speeds up cabinet integration in most cases.
• Approx. 1.5 m length (LZS-1500) – Practical reach for FBM-to-TA runs without excess coil or tension.
• Shielding optimized for control signals – Helps maintain signal integrity for analog/digital I/O in electrical noise environments.
• Cabinet-friendly jacket – Typically rated for industrial control panels; easy to route and tie down.
• Consistent pinout per FOXBORO standard – Keeps loop identification and maintenance straightforward.
• Drop-in replacement behavior – Designed for FOXBORO I/A Series FBM-to-TA interfaces, minimizing site modifications.

Technical Specifications

Related or Supporting Products

• FOXBORO FBM200-series modules (e.g., FBM201/FBM211/FBM241) – typical I/A Series I/O modules this cable connects to.
• FOXBORO Termination Assemblies (TA), P0926-series – cabinet-mounted TAs that receive the FBM signals.
• FOXBORO baseplates/backplanes, P0916-series – mechanical and electrical mounting for FBMs.
• Length variants in the same family (subject to availability), such as LZS-0500 (~0.5 m) or LZS-3000 (~3 m), when a shorter or longer run is needed.

A customer in a coker unit retrofit told me the 1.5 m version “hit the sweet spot” for routing across adjacent DIN-rail columns—no need to re-tray or add zip-tie anchors, which saved a few hours per panel during FAT.

Installation & Maintenance

• Cabinet environment – Keep within standard control cabinet conditions (dry, clean air, -20 to +60 °C typical). Provide adequate ventilation and avoid routing near high-heat sources.
• Wiring practices – Separate from high-voltage and VFD motor leads to reduce EMI. Maintain bend radius (often ≥ 8× cable OD) and secure with non-abrasive ties.
• Grounding/shielding – Terminate shields as per FOXBORO or site standard. In many cases, shield is bonded at the TA side only.
• Connector handling – Seat fully and, where provided, tighten latches/screws to manufacturer torque. Do not pull the cable by the connector body during routing.
• Routine checks – Periodic visual inspection for abrasion or crushed sections; verify strain relief; perform continuity checks during outages. Light, lint-free cleaning of connector contacts if needed.
• Change control – Label both ends and record loop mapping; it typically prevents mix-ups during hot cutovers or turnaround work.

Quality & Certifications

• CE conformity for low-voltage/control environments (typical for this category)
• RoHS-compliant materials in many cases
• UL/CSA wiring styles may apply depending on batch and jacket type (check label/spec sheet for exact markings)
• Manufacturer warranty is typically 12 months; units supplied are covered by our 365-day warranty terms above

Note: Compatibility can vary by FBM/TA variant and site standards. If you share your exact FBM type and TA part number, I can confirm pinout and length fit before you commit.