Description
GE IC695SFP002 (often ordered as IC695SPF002) – Gigabit LX SFP for PACSystems RX3i Fiber Networking
This small form-factor pluggable (SFP) transceiver is designed for GE PACSystems RX3i modules with SFP cages—typically used to run stable, long-distance Gigabit links in industrial plants. It’s a 1000BASE‑LX, 1310 nm single‑mode fiber SFP that usually covers up to 10 km over 9/125 μm SMF. From my experience, it’s the go‑to pick when you need noise‑immune networking between panels, process areas, or remote MCC rooms without pulling copper and worrying about interference.
You might notice the catalog is written as IC695SFP002 by GE; some buyers reference it as IC695SPF002. Functionally, we’re talking about the same LX SFP used on RX3i PROFINET and fiber-enabled Ethernet interfaces. It’s hot‑pluggable, simple to service, and in many cases reduces downtime during network upgrades.
Company’s Order Placement Process and Guarantees
- Warranty period: 365 days
- Delivery time: 1 week for in-stock; no more than one month at the latest
- Payment method: 50% advance payment, full payment for delivery
- Express delivery methods: fedex, UPS, DHL
Key Features
- 1000BASE‑LX (1310 nm) – Standard-compliant Gigabit fiber for reliable, long-distance links in control networks.
- Single‑mode reach up to 10 km (typical) – Ideal for connecting remote panels or buildings without repeaters.
- LC duplex interface – Widely available connectors; easy to patch and test.
- Hot‑pluggable SFP – Swap modules without powering down the PLC rack, reducing downtime.
- Digital diagnostics (DDM/DOM) – Many units report real‑time optical power and temperature to the host, simplifying troubleshooting.
- Industrial practicality – Fiber immune to EMI/RFI; typically more stable in VFD‑heavy environments.
- MSA‑compliant footprint – Fits RX3i SFP cages designed for GE SFP options (e.g., PROFINET controller modules).
Technical Specifications
| Brand / Model | GE PACSystems RX3i / IC695SFP002 (commonly referenced as IC695SPF002) |
| HS Code | 8517.62 (Communication apparatus for data transmission) |
| Optical Standard | IEEE 802.3z 1000BASE‑LX |
| Wavelength | 1310 nm (LX) |
| Fiber / Reach | Single‑mode (9/125 μm), up to 10 km typical; supports short MMF links with mode conditioning cable where applicable |
| Connector Type | LC duplex |
| Data Rate | 1.25 Gbps nominal |
| Power Requirements | 3.3 V from host SFP slot; typically < 1 W |
| Operating Temperature | 0 to +70 °C (commercial grade; industrial variants may differ) |
| Dimensions & Weight | Approx. 56.5 × 13.7 × 8.5 mm; ~20 g (SFP MSA) |
| Communication Interfaces | Optical TX/RX via LC; host electrical interface compliant with SFP MSA |
| Signal I/O Types | 1310 nm optical transmit/receive for Gigabit Ethernet |
| Installation Method | Hot‑pluggable SFP; insert into RX3i modules equipped with SFP cages (e.g., IC695PNC001 and similar) |
Where it fits best
- Linking remote RX3i panels across large production sites or between buildings without copper runs.
- Noise‑heavy areas with VFDs or welders where fiber typically outperforms copper for determinism.
- PROFINET controller uplinks that need longer reach and cleaner EMI behavior.
“We swapped to IC695SFP002 on our RX3i PROFINET ring and the intermittent dropouts disappeared. Diagnostics also helped us find a bad patch cord in minutes.” — Maintenance Supervisor, food & bev plant
Related or Supporting Products
- IC695SFP001 – 1000BASE‑SX (850 nm) MMF SFP, typically up to 550 m over OM3 fiber; good for short links inside buildings.
- IC695SFP003 – 1550 nm long‑reach SFP; used where extended distances are required (appears to be long‑haul compared to LX).
- IC695PNC001 – PACSystems RX3i PROFINET Controller module with SFP cage support; pairs directly with the SFP options.
- Single‑mode LC/UPC patch cords – 9/125 μm jumpers for panel wiring; keep dust caps on when not in use.
- Fiber accessories – LC attenuators, cleaning sticks, and visual fault locators for commissioning and maintenance.
Installation & Maintenance
- Panel/cabinet standards – Install host RX3i modules in ventilated enclosures, following standard PLC clearances. Maintain bend radius on fiber (typically ≥30 mm for patch cords).
- Wiring & grounding – Route fiber separately from high‑power cables. Keep SFP latching tab accessible for service.
- Safety – Never stare into live fiber. Use dust caps; handle optics with ESD protection.
- Commissioning – Verify link budget (connector/patch counts). Clean LC ferrules before mating; a quick inspect-and-clean avoids most headaches.
- Routine maintenance – Periodically check DDM/DOM values (if supported by host), clean connectors, and confirm link margins. Host module firmware updates can improve diagnostics and stability.
Quality & Certifications
- Conforms to IEEE 802.3z 1000BASE‑LX and SFP MSA
- CE and RoHS compliant; manufactured under ISO 9001 quality systems
- Warranty: 365 days
One thing I appreciate is how forgiving the LX optics are for plant layouts—10 km is more than most facilities need, and the EMI immunity alone tends to justify fiber in many cases. If you’re swapping from copper, this SFP usually makes the transition painless.
Reviews
There are no reviews yet.