PANASONIC MBDHT2510E02 AC Servo Drive – MINAS A5 200 V Pulse/Analog Type for High-Precision Motion

The PANASONIC MBDHT2510E02 is a MINAS A5 series AC servo drive designed for precise positioning and responsive speed control on 200 V class systems. From my experience, this model fits well in packaging lines, pick-and-place units, labeling machines, and indexing tables where fast settling and smooth motion really matter. You might notice that it pairs best with Panasonic A5 motors (MSME/MSMD/MHMD series), giving you that tight loop performance and easy parameter setup via PANATERM.

Order Placement Process and Guarantees

Key Features

• 200 V class servo amplifier – Suited for mid-power axes in multi-axis machines, typically on 200–240 VAC mains.
• Flexible command interfaces – Supports pulse train (line driver or open-collector) and ±10 V analog speed/torque commands, so it drops into both PLC pulse and analog control architectures.
• High-resolution motor feedback – Designed for Panasonic MINAS A5 motors with high-resolution encoders, helping achieve fast settling and stable low-speed tracking.
• Auto-gain tuning and vibration suppression – Setup is typically quick; the built-in tuning functions reduce hunting and overshoot on light or compliant loads.
• Service-friendly diagnostics – Alarm logs and waveform capture via PANATERM make it easier to troubleshoot and fine-tune on the floor.
• I/O style “02” – In many cases, the “02” suffix indicates sourcing (PNP) digital I/O, which is convenient for IEC-style panels. If your standard is NPN, we can cross-check alternatives.
• Braking resistor support – External dynamic braking resistor connection for rapid deceleration on high-inertia axes.
• Compact, book-style housing – Saves cabinet space and simplifies side-by-side mounting with proper clearance.

Technical Specifications

Related or Supporting Products

• MINAS A5 servo motors (MSME / MSMD / MHMD series, 200 V class) – Choose torque and inertia to suit your axis. One thing I appreciate is how quickly these motors auto-tune with this drive.
• Motor power cable & encoder cable sets – Panasonic factory cables for secure locking and noise immunity (shielded). It seems to be the fastest way to avoid EMI-related alarms.
• External braking resistor (200 V class) – For fast decel on high-inertia loads; size it to your deceleration profile.
• MBDHT2510E01 – Similar drive with NPN (sinking) I/O logic if your panel standard requires it.
• MINAS A6 (equivalent power class) – Newer generation with higher response and 23-bit encoders; worth considering for new designs or upgrades.

Installation & Maintenance

• Cabinet & ventilation – Mount vertically in a sealed control cabinet with adequate airflow; allow side/top clearance for heat dissipation. Keep away from high-heat sources.
• Power & protection – Use a dedicated circuit breaker, fast-acting fuses where applicable, and proper PE grounding. An EMC line filter is typically recommended on the mains.
• Wiring practices – Use shielded motor and encoder cables; separate power and signal routes. From my experience, tight grounding and clean cable routing reduce following error and noise trips.
• Tuning & commissioning – Start with auto-gain; then refine notch filters and vibration suppression only if needed. PANATERM waveform capture helps confirm stability under load.
• Routine checks – Inspect terminals for torque, clean dust from heatsink and vents, and verify fan operation (if present). Back up parameters after any change. Firmware updates can be applied during planned downtime.
• Braking resistor sizing – For aggressive deceleration, select a resistor with the correct Ohmic value and wattage; confirm duty cycle to avoid overheat.

Quality & Certifications

• CE and RoHS compliance for EMC and environmental standards (typical for MINAS A5 series)
• UL/cUL recognition on many A5 variants; exact file depends on sub-model
• Manufacturer warranty: 12 months (we provide 365-day coverage as stated above)