RPS TECH DMP10.24 – 24 V/10 A DIN‑rail Power Supply for Industrial Control Panels

The RPS TECH DMP10.24 is a compact, industrial-grade switching power supply built for 24 VDC control circuits that need dependable, clean power. From my experience, this 240 W class unit fits nicely into space‑restricted panels and typically runs cool under continuous loads. You might notice that it starts up confidently even with fluctuating mains, which is a relief on sites with less‑than‑perfect power quality.

Company’s Order Placement Process and Guarantees

• Warranty: 365 days
• Delivery time: 1 week for in‑stock; no more than one month at the latest
• Payment: 50% advance payment, full payment prior to delivery
• Express options: FedEx, UPS, DHL

Key Features

• 24 VDC / 10 A output (≈240 W) – Stable power for PLCs, I/O modules, valves, and motion control.
• Wide AC input – Typically 100–240 VAC, 50/60 Hz; handles brownouts and line variation well.
• High efficiency – Up to about 92% in many cases, helping reduce heat in crowded enclosures.
• Adjustable output – Fine-tune around 24–28 VDC for voltage drop compensation on long cable runs.
• Full protection suite – Overload/short‑circuit, over‑voltage, and thermal protections for safer operation.
• Industrial temperature range – Designed to work in harsh panels; derates gracefully at higher temps.
• DIN‑rail snap mounting – Quick install on 35 mm rail; IP20 touch‑safe terminals.
• Status indication – Front LED makes quick checks simple during commissioning.

Technical Specifications

Application Fields

The DMP10.24 typically sits at the heart of:

• Machine control panels (PLCs, I/O, contactors, sensors)
• Packaging and conveying systems with 24 VDC actuators
• Process automation skids in water/wastewater and chemical dosing
• Building automation (BMS), access control, and safety relays
• Material handling, sortation, and small motion systems
• OEM equipment where 24 VDC bus stability matters

A panel builder recently told us it “dropped straight into a 240 W slot and ran cooler than the previous unit,” which seems to be consistent with what we see in many cabinets.

Advantages & Value

• Reliability you can count on – Stable output and robust protections reduce nuisance trips and downtime.
• Compatibility – Footprint and terminal layout suit standard DIN‑rail panels; easy retrofit for 240 W slots.
• Cost efficiency – High efficiency typically means less heat, smaller fans, and fewer failures around the PSU.
• Global compliance – CE and UL pathways simplify cross‑region deployments and audits.
• Practical support – We can pre‑confirm load profiles, inrush, and derating so sizing is right the first time.

Installation & Maintenance

• Mounting – Snap onto a 35 mm DIN rail (EN 60715). Leave at least 25–30 mm clearance above/below for airflow.
• Wiring – Use copper conductors sized for 10 A DC bus; tighten terminals to the manufacturer’s torque. Connect PE to the panel ground bus.
• Ventilation – Passive convection; avoid placing heat sources directly beneath. Consider derating above ~50 °C ambient.
• Safety – Isolate mains before servicing. Verify output is discharged before touching DC lines.
• Routine checks – Quarterly: inspect for dust, tighten terminals, and verify output voltage setpoint. Yearly: load test at 80–100% for a short interval.
• Spare strategy – Keeping one spare per ten panels is, in most cases, a reasonable balance of risk and cost.

Quality & Certifications

• CE marked; EMC compliance to EN standards for industrial environments
• UL recognized/listed for industrial control (e.g., UL 62368‑1 / UL 508 context)
• RoHS and REACH compliant
• Manufacturer’s warranty: 12 months (365 days)

If you’d like, we can review your load profile (peak current, inrush, and redundancy requirements) and confirm the DMP10.24 sizing before you place the order—this often prevents oversizing and saves budget.