Description
GE IS210MACCH1AKH – Control Module for Mark VI/VIe Turbine and Process Systems
The IS210MACCH1AKH is a GE industrial control board commonly found in Mark VI/VIe platforms, typically used as a control/conditioning module within gas/steam turbine, compressor, and balance-of-plant applications. From my experience, this series is selected when teams need a field-replaceable module that integrates tightly with a GE control rack while keeping commissioning and maintenance reasonably straightforward. You might notice that it prioritizes stable backplane communication, diagnostic visibility, and long-term serviceability over flashy features—and that’s usually what matters at site.
Order Placement Process and Guarantees
- Warranty: 365 days (repair/replace policy, typically confirmed at PO)
- Lead time: In-stock items usually ship in 1 week; no more than one month at the latest
- Payment: 50% advance payment; full payment prior to delivery
- Express options: FedEx, UPS, DHL
Key Features
- Mark VI/VIe rack compatibility: Designed to operate within GE control racks, minimizing integration risk in upgrades and replacements.
- Stable backplane communications: Deterministic bus signaling for reliable control execution in turbine/process duty.
- Service-friendly diagnostics: Status LEDs and predictable fault reporting shorten troubleshooting time in most cases.
- Rugged build: Industrial-grade components and conformal coating practices are commonly applied to this family for harsh environments.
- Lifecycle support: Replaceable as a single FRU; typically supported by ToolboxST-based workflows for configuration and checks.
- Traceable revisions: The H1AKH variant denotes a specific hardware/firmware revision path, helpful for fleet standardization.
Technical Specifications
| Brand / Model | GE / IS210MACCH1AKH |
| HS Code | 853890 (Parts for industrial control equipment) |
| Power Requirements | Supplied from Mark VI/VIe backplane; typical low-power board consumption (<10 W across 5 V and/or 28 V rails) |
| Dimensions & Weight | Plug-in control board, standard GE rack form-factor (lightweight FRU; suitable for one-person handling) |
| Operating Temperature | Typically 0 to +60 °C in a ventilated cabinet (follow site derating and rack guidelines) |
| Signal I/O Types | Backplane control and monitoring signals; user I/O handled via associated terminal boards/I/O packs in the rack |
| Communication Interfaces | High-speed backplane bus; configuration/diagnostics typically via ToolboxST through the system controller network |
| Installation Method | Rack-mounted plug-in board with edge connector; secured by front retainers/screws in the GE control rack |
Application Fields
The IS210MACCH1AKH appears in heavy-duty control cabinets where high availability and predictable behavior are essential:
- Gas and steam turbine control (prime mover, sequencing, protection interfacing)
- Compressors and mechanical drives in oil & gas midstream/downstream
- Balance-of-plant controls (fans, pumps, fuel systems, auxiliaries)
- Industrial power generation and cogeneration packages
Advantages & Value for Procurement
- Drop-in compatibility: Helps reduce outage time during forced replacements or planned upgrades.
- Fleet standardization: Consistent revisioning (H1AKH) simplifies spares strategies across multiple sites.
- Reliability under load: These boards are chosen for deterministic behavior in mission-critical loops.
- Service ecosystem: Works smoothly with ToolboxST workflows and existing GE cabinet practices.
- Cost control: Field-replaceable module design usually lowers MTTR and site labor costs.
Customer note: “We swapped an IS210MACCH1AKH during a short outage; commissioning through ToolboxST was straightforward, and the turbine was back online within the shift.”
Installation & Maintenance
- Cabinet environment: Install in a clean, ventilated GE control rack; maintain airflow and keep within the cabinet’s thermal limits.
- Wiring & grounding: Ensure proper chassis ground and backplane seating; avoid cable stress on adjacent modules.
- ESD safety: Use antistatic handling; power down the rack and follow lockout/tagout before insertion or removal.
- Commissioning: Verify hardware part/revision match; load/confirm configuration via ToolboxST; run loopback or health checks as applicable.
- Routine care: Periodic dust cleaning (dry air), connector inspection, and firmware/configuration audits in line with site procedures.
Quality & Certifications
- Manufactured to industrial control quality standards; GE components typically align with CE requirements
- RoHS conformity applies to many modern revisions; UL/CSA alignment is module/assembly dependent
- Supply includes a 365-day warranty (standard replacement/repair terms)
Supporting Components (Commonly Paired)
- Mark VI/VIe I/O packs and terminal boards: Handle field analog/digital signals, leaving the IS210MACCH1AKH focused on control and backplane functions.
- System power supplies: Provide regulated 5 V/28 V rails to the rack; keeping these healthy minimizes nuisance trips.
- ToolboxST software: Used for configuration, diagnostics, and version management across the control system.
One thing I appreciate is how this module fits into established GE workflows—spare on the shelf, swap when needed, validate with ToolboxST, and move on. In many cases, that predictability is what keeps downtime short.
Reviews
There are no reviews yet.