Description
GE IS420PPNGH1A – PROFINET I/O Network Pack for Mark VIe/Mark VIeS Systems
The GE IS420PPNGH1A is a PROFINET I/O network pack designed for Mark VIe and Mark VIeS control architectures. From my experience, it’s the piece you use when you need a clean, deterministic bridge between the Mark VIe controller over IONet and field devices that speak PROFINET. It typically drops in with minimal engineering if you’re already running GE’s I/O packs and ToolboxST. You might notice that it shines in retrofit work—tying a turbine control to new PROFINET drives, MCCs, or remote I/O without reworking the entire cabinet.
Our Order Placement Process and Guarantees
- Warranty: 365 days
- Delivery: 1 week if in stock; no more than 1 month latest
- Payment: 50% advance payment; full payment before delivery
- Express options: FedEx, UPS, DHL
Key Features
- PROFINET integration – Enables Mark VIe/VIeS systems to communicate with PROFINET devices (drives, remote I/O, MCCs) without external gateways.
- Dual-redundant IONet – Two Ethernet ports provide the standard Mark VIe redundant IONet links for high availability.
- Industrial temperature range – Designed for harsh control cabinet conditions, typically suitable for turbine enclosures and BOP areas.
- Deterministic performance – Stable PROFINET I/O exchange; in many cases it reduces scan-time variability compared with software gateways.
- Field-upgradable firmware – Maintenance teams can update firmware via ToolboxST to keep pace with site standards.
- Compact I/O pack form factor – Mounts directly on the matching Mark VIe terminal board, keeping wiring short and tidy.
- Diagnostics indicators – Front LEDs for link/activity and status make on-site troubleshooting faster.
Technical Specifications
| Brand / Model | GE (General Electric) / IS420PPNGH1A |
| HS Code | 8538.90 (Parts suitable for electrical control/switchgear) |
| Power Requirements | 18–32 VDC supplied from the terminal board; < 10 W typical |
| Operating Temperature | -40 to +70 °C (industrial range) |
| Signal I/O Types | PROFINET I/O data over Ethernet (no direct analog/digital channels) |
| Communication Interfaces | IONet: 2 × 10/100Base‑TX (RJ45, redundant) PROFINET: 2 × 100Base‑TX (RJ45) |
| Installation Method | Direct mount to compatible Mark VIe/VIeS terminal board inside control cabinet |
| Dimensions & Weight | Compact I/O pack footprint; approx. 100 × 70 × 40 mm; ~0.25–0.30 kg |
| Time Sync | IEEE 1588 PTP on IONet (site-dependent configuration) |
Application Fields
Typically used in turbine and process control where a Mark VIe/VIeS controller needs to talk to PROFINET devices:
- Gas/steam turbine auxiliaries – coupling to PROFINET drives, valve actuators, and skids.
- Balance of Plant (BOP) – MCCs, VFDs, and remote I/O islands using PROFINET.
- Oil & Gas compression and pipeline stations – integrating third‑party PROFINET PLC panels into Mark VIe logic.
- Retrofits – replacing legacy gateways with a native pack to simplify wiring and reduce latency.
One maintenance engineer told us they swapped to IS420PPNGH1A during a hot section outage and “didn’t have to touch the cabinet layout—just configured the device list and it came online quicker than expected.”
Advantages & Value
- Native compatibility – Works within the Mark VIe toolchain, typically reducing engineering hours versus stand‑alone gateways.
- Reliability – Redundant IONet and industrial temperature design help minimize unplanned downtime.
- Lifecycle support – Firmware maintenance and replace-in-kind approach lower long-term cost of ownership.
- Clean cabinet layout – Direct pack-to-terminal-board mounting keeps network and power runs short and organized.
Installation & Maintenance
- Cabinet & mounting – Install on the designated Mark VIe/VIeS terminal board inside a clean, ventilated control cabinet; allow space for cable bend radius.
- Power & grounding – Use the terminal board supply (18–32 VDC). Maintain proper panel grounding and shield termination per GE wiring practices.
- Networking – Use industrial Cat5e/Cat6 for IONet and PROFINET. Keep redundant IONet paths physically separated where possible.
- Safety – De-energize before pack replacement if site procedures require; observe ESD controls when handling the pack.
- Routine care – Periodically verify link status, clean dust from vents, review device diagnostics, and apply approved firmware updates via ToolboxST during planned outages.
- Configuration – Map PROFINET device addresses and I/O modules carefully; a short validation test typically catches mismatched GSD configurations.
Quality & Certifications
- CE and UL compliance; RoHS in most cases (site documentation may specify exact revisions).
- When applied within Mark VIeS architectures, it can participate in safety designs per system-level certification (consult your safety case).
- Warranty: 365 days from shipment.
Reviews
There are no reviews yet.