Description
Product Overview The CC-SCMB02 is the memory backup module for Honeywell Experion PKS C300 controller (CC-PCNT02 you checked previously). It integrates lithium backup battery and NVRAM storage to retain control strategy, tuning parameters, alarm setpoints and runtime state data during sudden power loss. After power restoration, the C300 loads saved state locally for fast bumpless recovery, avoiding full re-download from Experion server. It installs into the dedicated slot on CC-TCNT01 controller IOTA base, widely used in refinery, chemical, power and oil & gas DCS panels.
Technical Specifications
- Manufacturer: Honeywell Process Solutions
- Model: CC-SCMB02, alternate PN: 51199932-200
- Device Type: C300 controller memory backup assembly
- Platform: Experion PKS C300 Series‑C
- Compatible controller: CC-PCNT01, CC-PCNT02
- Storage: 2 MB NVRAM
- Backup battery: 3.6V LiMnO₂ primary lithium battery
- Hold time: Up to 72 hours data retention at 25°C ambient
- Interface: Proprietary local bus to C300 processor
- Mounting: Direct plug-in on CC-TCNT01 termination base
- Hot swap: Supported under redundant controller setup
- Status indicators: Battery OK, DATA active LED
- Diagnostics: Low battery warning, memory integrity check
- Operating temperature: 0°C ~ +60°C
- Humidity: 5% – 95% non‑condensing
- Weight: Approx. 0.28 kg
- Certifications: CE, UL, CSA
- Feature: Transparent background snapshot, no user configuration required, battery replaceable on-site, compatible with Control Builder software battery health monitoring
Differentiation Notes CC-SCMB02 = legacy backup module for older C300 PCNT01 / PCNT02; CC-SCMB05 is the updated backup unit for newer CC-PCNT05 controller. It is not an I/O or communication card, only for volatile control state retention. This C300 spare is available as original new, NOS and refurbished stock.








Reviews
There are no reviews yet.