Description
Product Overview The CC-PAIH01 is a high-level HART analog input module for Honeywell Experion PKS C300 Series-C DCS platform. It collects 4–20mA and voltage signals from pressure, flow, level and temperature transmitters, and supports HART 7 multi-variable data reading for device diagnostics and parameter access. It works with matched IOTA termination base, supports hot swap and redundant I/O configuration, widely deployed in refinery, chemical, power and oil & gas process control systems.
Technical Specifications
- Manufacturer: Honeywell Process Solutions
- Model: CC-PAIH01
- Device Type: HART high-level analog input module
- Platform: Experion PKS C300, Series-C I/O rack
- Channels: 16 channels (12 single-ended + 4 configurable differential)
- Input signal: 4–20mA, 0–5V, 1–5V, 0.4–2V
- ADC resolution: 16-bit
- Accuracy: ±0.075% FS @25°C; ±0.15% FS across full temperature range
- Scan rate: 50 ms
- Protocol: HART 7
- Field power: Non-incendive loop supply for hazardous Division 2 area
- Matching IOTA: CC-TAIX01 (non-redundant), CC-TAIX11 (redundant)
- Galvanic isolation: 500 VAC isolation between field side and backplane
- Diagnostics: Per-channel open wire, short circuit and overload detection
- Hot swap: RIUP online replacement supported
- Backplane supply: 18–36 VDC, typical 4.2 W power consumption
- Enclosure: IP20
- Operating temperature: 0°C ~ +60°C
- Humidity: 5% – 95% non‑condensing
- Weight: Approx. 0.36 kg
- Certifications: CE, UL, CSA
- Feature: Anti-aliasing filter, configurable channel mode via IOTA jumper, integrated HART pass-through, compatible with Control Builder engineering software
Differentiation Notes CC-PAIH01 = mixed current & voltage HART AI; CC-PAIH51 is current-only 4–20mA HART analog input variant without voltage support. CC-PAOH01 is the corresponding HART analog output module. Series-C C300 I/O is mature DCS spare, available as original new, NOS and refurbished spare parts.








Reviews
There are no reviews yet.