Description
The ULDIOR-20A is a passive, diode-based OR-ing (redundancy) module that lets two independent DC power sources — typically dual 24 V DC supplies, a UPS branch and a mains-fed branch, or two battery strings — feed one common load bus without back-feeding into each other. Each input bank is buffered by power diodes mounted on extruded aluminium heat sinks, so the higher-voltage source carries the load while the lower one is blocked; if the primary supply collapses, the secondary takes over in the diode’s conduction time, with no switching logic, firmware, or control signal involved. This removes the single point of failure in PLC, DCS and I/O power architectures, prevents reverse current from a charged bus into a failed supply, and keeps the load energised during supply replacement or maintenance. Because it is purely passive, it adds no start-up sequencing, no configuration and no communication dependency to the power path — it continues to operate even if the control system around it is down. The 20 A rating suits distribution feeds for I/O racks, isolators, transmitters and field enclosures.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | UL (UL Group / UL Automation Systems Pvt. Ltd.) |
| Model | ULDIOR-20A |
| Item Code / Part No. | ULPWDIOR-20 / 20125201 |
| Function | 2-channel diode OR-ing (redundancy) module, passive |
| Rated Current | 20 A |
| Input | 2 independent DC input banks, screw terminals marked 1+/1− and 2+/2− (paralleled terminals for current sharing) |
| Output | Single common DC output bus, diode-OR combined from both inputs |
| Redundancy Behaviour | Automatic load transfer to the higher-voltage source; reverse-current blocking, no back-feed into the standby supply |
| Power Path | Passive power diodes on extruded aluminium heat sinks; no active switching, no control logic |
| Isolation | Reverse blocking between inputs; no galvanic isolation (common negative reference) |
| Communication | None — no bus, no I/O signals, no firmware |
| Mounting | 35 mm DIN rail, green module housing |
| PCB Flammability | UL 94V-0 |
| Weight | Approx. 400 g (0.4 kg) |
| Warranty | One Year |
| Condition | 100% New & Original |
Key Notes
- Current rating is module-level (20 A); size the feed so total load current stays within rating, and account for diode forward conduction losses when calculating heat-rise in an enclosed cabinet.
- Inputs share a common return; the module blocks reverse current, it does not provide isolation between the two sources.
- Verify terminal torque and cable cross-section against the terminal block marking on the unit before energising.







Reviews
There are no reviews yet.