Description
Product Overview
The 4PP420.0571-75 is a Power Panel PP420 operator terminal that combines an industrial HMI with an embedded controller in a single panel-mount unit — a 5.7″ QVGA colour TFT with an analog resistive touchscreen driven by a 500 MHz Geode LX800 processor running B&R’s Automation Runtime. Instead of pairing a separate PLC and a separate display, the device hosts the visualization and the control application together, so machine sequencing, recipe handling, alarm management and the operator interface share one CPU and one project file. That removes a communication link and an enclosure from the cabinet, and cuts the wiring between display and controller. Typical use is on compact machines, retrofits and legacy PP420 installations where a failed panel must be replaced without re-engineering the cabinet: the unit keeps the PP420 cutout, the 24 VDC supply and the standard Ethernet, RS232 and USB field interfaces, so an existing project and its peripherals can be carried over. Cooling is passive, with no fan to fail in a dusty cabinet.
Technical Specifications
表格
| Parameter | Specification |
|---|---|
| Brand | B&R (Bernecker + Rainer) |
| Model | 4PP420.0571-75 |
| Product Line | Power Panel PP420 (Power Panel 400 embedded) |
| Function | Panel-mount HMI with integrated Automation Runtime controller |
| Processor | Geode LX800, 500 MHz, FPU, MMX / 3D Now; passive heat-sink cooling |
| Memory | 128 MB SDRAM; 512 kB battery-backed SRAM; 2 MB firmware flash |
| Storage | CompactFlash slot, Type I |
| Display | 5.7″ (144 mm) TFT colour, QVGA 320 x 240, 262,144 colours, 500 cd/m², contrast 350:1, CCFL backlight 50,000 h half-brightness |
| Touch Screen | Analog resistive (AMT), 12-bit, transmittance up to 80% ±5% |
| Input / Output | 24 VDC nominal (18–30 VDC range), 0.5 A nominal, typ. 12 W, inrush max. 1.2 A, galvanically isolated; 24 VDC terminal block ordered separately (3-pin screw clamp or cage clamp) |
| Communication | 1x Ethernet 10/100 Mbit/s (Intel 82551ER); 1x RS232 COM1, 9-pin male DSUB, 16C550-compatible UART with 16-byte FIFO, max. 115 kbit/s, modem supported, not isolated; 2x USB 2.0 Type A, max. 500 mA per port |
| Expansion | 1 aPCI slot for interface modules |
| Operating Temp | 0 to 50 °C (storage / transport -20 to 60 °C); operation up to 3000 m elevation |
| Protection | Front IP65 / NEMA 250 Type 4X indoor (dust-tight, hose-directed water); rear IP20 with CF card or aPCI module fitted |
| Vibration / Shock | Operation 2–9 Hz: 1.75 mm, 9–200 Hz: 0.5 g; shock 15 g / 11 ms |
| Dimensions / Weight | 212 x 156 x 76 mm (W x H x D); 1.70 kg |
| Housing | Metal housing, naturally anodized aluminium frame, polyester overlay, flat front gasket |
| Backup | Renata 950 mAh lithium battery, 3-year service life, externally replaceable; 10 min buffer |
| Certification | CE, UKCA, cULus E115267 (industrial control equipment), KC |
| Warranty | One Year |
| Condition | 100% New & Original |
Key Notes
- The 24 VDC connector is not included — a 3-pin terminal block (screw clamp 0TB103.9 or cage clamp 0TB103.91) must be specified with the panel.
- Front IP65 applies to the installed panel with the gasket compressed; the rear compartment needs a sealed enclosure.
- Replace the backup battery on its 3-year cycle, or the SRAM retentive data and real-time clock are lost at power-off.








Reviews
There are no reviews yet.