Description
The 810.79.40C is the regulator printed-circuit board inside a Reliance FlexPak 3000 digital DC drive. It is the board that actually closes the armature loop: it reads armature voltage and current feedback, executes the drive’s speed and current regulation in firmware held in an on-board EPROM, and issues the thyristor firing commands through the power interface, while also handling field control signals, metering outputs and the drive’s parameter set. Because the control firmware lives in the EPROM on this board, a failed regulator takes the whole drive down even when the thyristors and power stack are healthy — and the drive’s personality, parameter values and tuning travel with the board. This is the reason the board is listed as an urgently recommended spare in the FlexPak 3000 manuals: a matching regulator with the right firmware revision restores a line quickly, and the configuration can be backed up or reloaded over its RS-232 port using the drive configuration software.
Technical Specifications
- Brand: Reliance Electric
- Model: 810.79.40C (order/reference 8107940C; base part 810.79.40, revision C)
- Product Family: FlexPak 3000 digital DC drive
- Function: Regulator board — armature voltage/current regulation, thyristor firing control, field and metering signal handling
- Firmware: Drive control firmware held in on-board EPROM; revision must match the drive’s software version
- Input / Output: 3 analog inputs, 2 analog outputs (metering), digital logic inputs and outputs for drive control, frequency input/output for tach and pulse signals
- Communication: 1x RS-232 port for drive configuration, parameter upload/download and diagnostics (OIM / drive configuration software)
- Field Interface: 1 terminal strip, 32 terminal points for control and signal wiring
- Analog Setpoint: High-side +10 V isolated, wiper, low-side reference; 1.3 kΩ max potentiometer
- Operating Temp: 0 to 55 °C; humidity 5–95% RH non-condensing; altitude up to 3300 ft (1000 m)
- Mounting: Plug-in PCB inside the drive chassis, fixed orientation required, ribbon/terminal connection to the power interface
- Dimensions / Weight: PCB assembly, approx. 1.4 kg
- Origin: Switzerland
- Reference Manual: D2-3404 (FlexPak 3000 hardware reference)
- Warranty: One Year
- Condition: 100% New & Original
Key Notes
- The revision letter matters: 810.79.40C carries a specific firmware EPROM set. A board with different firmware will not match the drive’s programmed parameters without re-configuration or an EPROM swap.
- Record all drive parameters before swapping the board — losing the regulator means losing the tuning, motor nameplate data and field settings stored with it.
- The field current regulator (762.70.70) is a separate board; a field-related fault is not always the regulator board’s fault.








Reviews
There are no reviews yet.