Description

6410‑024‑N‑N‑N Dual‑Channel Displacement Monitor Module

Technical Specifications

• Product Model: 6410‑024‑N‑N‑N
• Brand: Emerson EPRO
• Warranty: One Year
• Input Voltage: 24 VDC nominal, 450 mA max power consumption
• Operating Temperature: 0 °C to +60 °C
• Storage Temperature: -40 °C to +85 °C
• Response Time: <25 ms full‑value update
• Protection Class: IP20 (DIN‑Eurocard rack‑mount)
• Accuracy Class: ±0.25 % full‑scale static measurement
• Output Frequency: DC‑100 Hz signal bandwidth
• Rated Current Range: 4‑20 mA isolated analog output, max 600 Ω loop load
• Communication Interface: RS485 multi‑drop bus; rear field screw terminals
• Supported Protocols: MMS‑bus for MMS6800 host system; 4‑20 mA analog
• Overload Capacity: Sensor‑input transient suppression; short‑circuit field‑output protection
• Dimensions: 160 mm × 100 mm × 22 mm (10TE Eurocard format)

---

Product Overview

The 6410‑024‑N‑N‑N is a dual‑channel measuring amplifier module belonging to the EPRO MMS6000 machinery‑protection platform, engineered for inductive displacement transducers such as PR9350 series sensors. It captures static and low‑frequency dynamic displacement data for turbine case expansion, valve stem position, shaft differential expansion and casing thermal‑growth measurements. The unit supports sum‑and‑difference mathematical computation across its two input channels to derive differential position values without external calculation hardware.

This module addresses typical turbomachinery monitoring pain points: stable low‑drift static‑position acquisition, electrical noise rejection in high‑EMI power‑plant cabinets, and flexible signal export to DCS or SCADA via standard analog loops. Built‑in sensor fault detection flags open‑circuit and short‑circuit transducer wiring, triggering defined alarm states for operator awareness. Turbine‑protection engineers, power‑plant retrofit teams and condition‑monitoring service technicians benefit most. It fits standard Eurocard rack slots, supports hot‑swap replacement within MMS6000 racks, and delivers drop‑in spare‑part functionality for steam‑turbine and gas‑turbine protection systems across power‑generation and heavy‑process‑industry sites. (Word count:176)

---

Key Application Notes

• Designed exclusively for inductive half‑bridge / full‑bridge displacement sensors; not compatible with proximity eddy‑current probes
• Two independent channels can operate standalone or compute sum / difference position values
• RS485 MMS‑bus connection transmits raw and processed measurement values to MMS6800 diagnostic host
• Each channel provides configurable 4‑20 mA analog output for host control‑system integration
• Conformal‑coated PCB assembly improves reliability under high‑humidity cabinet‑operating conditions
• Meets common turbomachinery protection requirements aligned with API 670 guidelines