Description

GE IS215VAMBH1A Turbine Acoustic & Vibration Monitoring VME Board

Technical Specifications

• Product Model: IS215VAMBH1A
• Brand: GE General Electric
• Warranty: One Year
• Input Voltage: 5VDC @ 2.5A, 12VDC @ 0.5A backplane power supply
• Operating Temperature: 0°C to +60°C
• Storage Temperature: -40°C to +85°C
• Response Time: ≤2ms signal sampling latency with 8x oversampling FPGA processing
• Protection Class: IP20 (VME rack cabinet installation)
• Accuracy Class: ±0.1% full-scale analog signal conversion, 1500VAC channel-to-backplane isolation
• Output Frequency: Maximum 48kHz acoustic signal sampling rate
• Rated Current Range: Total board power consumption 18.5W maximum
• Communication Interface: VME backplane bus, D-type field wiring connectors, BNC buffered test output port
• Supported Protocols: Mark VI IONet internal control bus, turbine protection system proprietary data protocol
• Overload Capacity: Built-in channel overvoltage clamping, EMC surge filtering, open-circuit sensor line detection
• Dimensions: 160mm (L) × 100mm (W) × 25mm (H), standard 6U VME form factor
• 

Product Overview

The IS215VAMBH1A is a dedicated VAMB (Vibration Acoustic Monitoring) circuit board designed exclusively for GE Mark VI Speedtronic TMR turbine control and protection platforms. This 18-channel signal conditioning and acquisition module pairs with TAMB terminal sub-boards to capture raw acoustic combustion dynamics and mechanical vibration data from large frame 6, 7 and 9 heavy-duty gas turbines in power generation plants. It executes on-board FIR digital filtering, high-speed oversampling and impedance bias control to refine noisy field sensor signals before transmitting processed diagnostic data to the main turbine controller for real-time supervision.

It addresses high-risk operational vulnerabilities in critical power assets, including unfiltered combustion pressure oscillation leading to turbine component fatigue, undetected sensor wiring open faults causing blind protection loops, insufficient multi-point monitoring coverage for multi-chamber gas turbines, and cumbersome manual signal calibration during routine outages. Constructed with industrial-grade FPGA chips, reinforced backplane connectors, EMC interference suppression circuits and status LED indicators, the module maintains stable measurement performance under high cabinet temperature, generator room vibration and electrical grid harmonic distortion typical in combined-cycle power stations.