Description

HiD2082 Pepperl+Fuchs 2‑Channel Temperature Converter Isolator

Technical Specifications

• Product Model: HiD2082
• Brand: Pepperl+Fuchs
• Warranty: One Year
• Function: 2‑channel intrinsic‑safe temperature signal converter / isolated barrier for hazardous area applicationsPepperl+Fu…
• Input: Thermocouple TC, RTD, millivolt, potentiometer sensor signals from Ex‑zone field devices
• Output: Isolated 4‑20 mA source/sink or 1‑5 V voltage signal, supports 1‑input‑to‑2‑output signal‑splitter mode
• Power Supply: 20.4‑30 VDC bus‑powered via termination board, max 1.95 W power consumptionPepperl+Fu…
• Safety Level: SIL2 certified according to IEC 61508 / IEC 61511; ATEX / IECEx intrinsic‑safe approvalfiles.pepp…
• Fault Detection: Line fault detection (LFD), sensor break monitoring, fault‑bus signal output with red LED indication
• Configuration: Side DIP‑switches or PACTware software parameterization
• Mounting: HiD series termination board plug‑in module
• Operating Temperature: ‑20 °C ~ +60 °C
• Storage Temperature: ‑40 °C ~ +85 °C
• Protection Class: IP20
• System Compatibility: DCS / PLC system for oil‑gas, chemical plant hazardous‑area temperature measurement
• Diagnostics: Sensor‑break / wire‑fault indication, fault‑bus status output
• Humidity: 5‑95 % RH non‑condensing
• Weight: 0.28 kg
• Dimensions: 18 mm × 114 mm × 130 mm (W×H×D)
• 

Product Overview

HiD2082 is discontinued dual‑channel intrinsic‑safe temperature signal isolator from Pepperl+Fuchs. It receives temperature sensor signals from explosive hazardous area, performs linearization and galvanic isolation, outputs standardized analog signal to safe‑side DCS/PLC. Supports signal‑splitter function for one sensor feeding two control‑system channels. SIL‑2 safety capability for safety‑related temperature loops. Surplus and refurbished tested spare barrier module for legacy hazardous‑area instrument systems.

Application Notes

‑ Install matched HiD‑series termination base for power and signal wiring. ‑ Set sensor type, range and output mode via DIP‑switch or PACTware before commissioning. ‑ Typical deployment: Intrinsic‑safe temperature converter barrier spare‑part stocking.