Description
Technical Specifications
- Product Model: IS420YAICS1A
- Brand: GE General Electric
- Warranty: One Year
- Input Voltage: 24 V DC logic supply (18‑32 V DC wide range); powered via dual‑Ethernet IONET network
- Operating Temperature: ‑40 °C ~ +70 °C
- Storage Temperature: ‑40 °C ~ +85 °C
- Response Time: Analog sampling cycle ≤1 ms; dual‑network failover <10 ms
- Protection Class: IP20, rack‑mount inside control cabinet
- Accuracy Class: ±0.1 % FS full‑range; 16‑bit ADC resolution
- Output Frequency: Not applicable, analog I/O pack
- Rated Current Range: Typical power consumption 5.3 W; dual RJ45 Ethernet ports, supports simplex / TMR triple‑modular‑redundancy deployment
- Communication Interface: Dual redundant Ethernet (IONET); mates with TBAISIC / STAIS2A terminal boards
- Supported Protocols: GE IONET protocol; compatible with ControlST engineering software
- Overload Capacity: Channel‑level surge, over‑voltage, over‑current protection; conformal coated circuit board; fault isolation without cross‑channel propagation
- Dimensions: 82.6 mm × 41.9 mm × 121.4 mm; weight approx. 0.48 kg
- Channel Configuration: 10 analog inputs (8 channels ±5 V / ±10 V / 4‑20 mA; 2 channels ±1 mA / 4‑20 mA); 2‑channel 0‑20 mA analog outputs
Product Overview
The GE IS420YAICS1A is a YAIC high‑performance analog I/O pack for GE Mark VIeS safety‑critical turbine control system. It acts as remote I/O node connected via dual‑Ethernet IONET network, collecting multi‑range analog field signals from transmitters and delivering analog output set‑points to actuators and positioners. Supports simplex and TMR triple‑modular‑redundant architectures for gas‑turbine, steam‑turbine and combined‑cycle safety‑related control loops. It addresses typical power‑plant pain points including high‑reliability safety‑I/O requirements, single‑network‑failure risks, mixed voltage/current sensor signal interfaces and harsh turbine‑hall environmental conditions. Turbine‑control engineers, commissioning technicians and power‑plant‑maintenance teams benefit from this unit; dual‑Ethernet redundancy improves communication reliability, hardware filtering suppresses field‑site noise interference, and conformal coating adapts to plant‑harsh‑environment. It is used for new‑build Mark VIeS safety‑system projects and drop‑in spare‑part replacement for existing IS420YAICS1A installations. Note: IS420YAICS1A and IS420YAICS1B hardware revisions cannot be mixed within one TMR group.
Application Scenarios
- Gas‑Steam Turbine Safety‑Related Analog‑Signal Acquisition: Collects pressure, flow, exhaust‑temperature, compressor‑discharge‑pressure transmitter signals for turbine protection and control loops; outputs governor‑valve analog control commands. TMR‑redundant mode meets turbine safety‑protection requirements.
- Combined‑Cycle Power‑Plant Balance‑of‑Plant Control: Interfaces with 4‑20 mA smart transmitters for boiler auxiliary, condenser and cooling‑tower process‑measurement points. Dual‑network design avoids single‑point communication‑failure risk.
- Oil‑&‑Gas Compressor‑Turbine Control Systems: Deployed for drive‑turbine control cabinets in compressor‑station sites. Wide‑temperature‑range and anti‑vibration capability adapts to heavy‑industry field‑site environments.
- Legacy Mark VIeS System Retrofit & Spare‑Part Replacement: Direct‑form‑fit spare‑part for existing IS420YAICS1A hardware. Terminal‑board and IONET‑protocol compatibility minimizes cabinet‑modification work and shortens plant‑downtime during module swap‑out.
Reviews
There are no reviews yet.