Description

MOOG T200‑410J‑0AA1 T200 Series Programmable Servo Drive

Technical Specifications

• Part Number: T200‑410J‑0AA1
• Brand: MOOG (USA)
• Warranty: One Year
• Power Rating: 3.75 kW continuous servo drive unit
• Input Voltage: 90‑265 VAC single‑/three‑phase 50/60 Hz integrated mains power supplyMoog Inc.
• DC‑Bus: Nominal 325‑350 VDC internal DC‑bus
• Output: Max 10 A continuous motor current for AC‑servo motors
• Operating Temperature: 0 °C ~ +55 °C cabinet‑mount; derate output above 45 °CMoog Inc.
• Storage Temperature: ‑20 °C ~ +70 °C
• Response Time: High‑speed current‑loop cycle; supports position, velocity, torque closed‑loop control modes
• Protection Class: IP20 cabinet‑only installation; metal housing; panel‑mount form‑factor
• Feedback Interfaces: Resolver, incremental encoder input; encoder simulation output functionMoog Inc.
• I/O Resources: 2‑channel analog input; 2‑channel analog output; 10‑channel isolated digital‑input; 5‑channel digital‑output; 2‑form‑C relay outputs (brake, ready status)Moog Inc.
• Communication Interface: Dual RS485 D‑SUB 9 connectors for daisy‑chain multi‑drive network; front‑panel 7‑segment fault display & LED status indicators; service port for PC commissioning tool
• Supported Protocols: MOOG T200 proprietary RS485 motion bus; standalone programmable motion sequence operation; host‑PLC set‑point control
• Overload Protection: Over‑voltage, under‑voltage, output short‑circuit, over‑current, drive overtemperature, feedback‑loss fault‑diagnostics; fault‑history log storageMoog Inc.
• Dimensions / Weight: approx 270 mm ×160 mm ×85 mm; weight ~5.6 kgMoog Inc.

Product Overview

The T200‑410J‑0AA1 belongs to MOOG T200 series programmable multi‑mode servo drive. It is capable of standalone motion‑sequence programming or receiving set‑point commands from upper‑level PLC system, driving high‑performance AC‑servo motors for closed‑loop position‑speed‑force control. This model integrates internal mains power‑supply, no external DC‑bus power unit required. It supports resolver / encoder feedback, built‑in analog & digital I/O for direct sensor‑and‑actuator connection. Comprehensive fault‑diagnostic functions simplify on‑site troubleshooting for industrial‑automation systems.

This servo‑drive addresses high‑dynamic motion‑control challenges: standalone programmable motion capability without dedicated motion controller, integrated power‑stage + I/O in single compact unit, drop‑in spare‑part compatibility for legacy T200‑series retrofit‑maintenance projects. Automation‑control engineers, plant‑maintenance technicians and retrofit integrators benefit most. Widely applied for test‑benches, hydraulic‑simulation equipment, material‑handling machinery and heavy‑duty industrial positioning‑axis applications.

Key Application Notes

• Integrated AC‑mains servo drive; must pair with matched MOOG servo‑motor and feedback sensor; cannot operate standaloneManualsLib
• OEM original production is discontinued; available as aftermarket refurbished / surplus spare part
• Not hot‑swap capable: AC mains input must be fully disconnected; DC‑bus capacitors require mandatory discharge waiting‑time before drive replacement
• J suffix defines hardware connector variant; spare replacement must match full part number to avoid mechanical‑connector mismatch
• Commissioning, motion‑programming and parameter tuning implemented via MOOG T200 PC configuration software
• Conformal‑coated PCB variant available for high‑humidity, high‑contaminant cabinet environments
• Follow MOOG T200 official user‑manual for EMC‑filter wiring and safety‑relay brake‑circuit configuration