Description
Product Overview The CM3201S2 is a TMR communication interface module for Triconex Tricon v9/v10/v11 SIS safety system (Schneider Electric). It bridges the Tricon safety controller to external Modbus RTU instruments, meters and third-party controllers, supporting asynchronous serial communication for alarm, calculation and interlock data exchange. It is widely used in refinery, chemical, power and oil & gas ESD safety cabinets.
Technical Specifications
- Manufacturer: Triconex (Schneider Electric)
- Model: CM3201S2
- Device Type: Tricon serial communication module
- Platform: Tricon v9, v10, v11
- Architecture: Triple Modular Redundant (TMR)
- Ports: 2 configurable RS232 / RS485 serial channels
- Baud rate: Up to 115.2 kbps
- Supported protocols: Modbus RTU, ASCII, Triconex proprietary protocol
- Isolation: 1500V RMS isolation between channels and ground
- Power supply: 24VDC (19.2–30VDC), max 8W consumption
- Hot swap: Supported under redundant rack configuration
- Status LED: Pass, Fault, Active
- Diagnostics: Frame error, parity check, link health monitoring
- Mounting: Standard Tricon rack slot
- Operating temperature: 0°C ~ +60°C
- Humidity: 5% – 95% non‑condensing
- Weight: Approx. 1.5 kg
- Certifications: TÜV, IEC 61508 SIL3, IEC 61511 compliant
- Feature: Configured via Triconex TriStation software, designed for safety instrumented system
Differentiation Notes CM3201S2 = serial Modbus communication variant; CM3201E2 is the Ethernet FTE communication version for Tricon. This serial CM card cannot replace Ethernet communication modules. Tricon legacy SIS spare, available as original new, NOS and refurbished stock.




Reviews
There are no reviews yet.