Description
Product Overview The SST-PB3-PCU-2 is a dual-channel PROFIBUS‑DP PCI interface card originally developed by SST, later acquired by Molex and widely used within Woodward turbine control platforms. It enables a host industrial PC or controller to act as PROFIBUS master or slave, exchanging high-speed cyclic process data with remote DP slaves such as drives, I/O modules and valve positioners. It supports independent operation of the two ports, allowing segregated bus networks or redundant PROFIBUS topologies. It is commonly fitted into turbine, engine and generator control cabinets for real-time fieldbus communication.
Technical Specifications
- Manufacturer: SST (Molex / Woodward)
- Model: SST-PB3-PCU-2
- Device Type: Dual port PROFIBUS‑DP PCI communication card
- Host bus: Standard 32-bit PCI
- PROFIBUS ports: 2 × 9-pin D-Sub
- Protocol: PROFIBUS‑DP, master / slave configurable
- Baud rate: Up to 12 Mbps
- Onboard memory: Dedicated local RAM for bus data buffering
- Software support: SST configuration utilities, FDT/DTM, compatible with Woodward tool suites
- Power draw: +3.3 VDC and +5 VDC supplied from PCI slot
- Form factor: Half-length PCI card
- Operating temperature: 0°C ~ +60°C
- Humidity: 5% – 95% non‑condensing
- Weight: Approx. 0.18 kg
- Certifications: CE
- Feature: Each channel can run separate baud rates; hardware-assisted bus processing to reduce host CPU load; built-in bus diagnostics and fault counters
Differentiation Notes SST-PB3-PCU is the single-port predecessor; -2 indicates dual independent PROFIBUS ports. Do not confuse it with SST-PB3-CLX which is a ControlLogix backplane module. This legacy PCI version is not PCIe compatible. Original production discontinued, available as NOS, refurbished and surplus spare parts for Woodward and legacy PC-based automation systems.








Reviews
There are no reviews yet.