Description
Technical Specifications
- Product Model: AAI135‑H53
- Brand: Yokogawa
- Warranty: One Year
- Input Voltage: 5 V DC backplane power supply, transmitter loop power 15‑29.3 V DC
- Operating Temperature: ‑20 °C to +70 °C
- Storage Temperature: ‑40 °C to +85 °C
- Response Time: 10 ms module data update cycle
- Protection Class: IP20, rack‑mount for control cabinet installation
- Accuracy Class: ±0.05 % FS measurement accuracy for 4‑20 mA signals
- Output Frequency: Not applicable, analog input acquisition module
- Rated Current Range: Max 360 mA backplane consumption; 4‑20 mA loop input, max 25 mA per channel over‑current withstand
- Communication Interface: CENTUM VP back‑plane bus, HART modem per channel
- Supported Protocols: HART 5/7, Yokogawa DCS proprietary bus protocol
- Overload Capacity: 500 V AC isolation withstand (channel‑to‑system, channel‑to‑channel); built‑in over‑current and open‑loop detection
- Dimensions: 107.5 mm × 32.8 mm × 130 mm, compact European‑style rack‑mount I/O module
Product Overview
The Yokogawa AAI135‑H53 is an 8‑channel galvanically isolated analog input module designed for CENTUM VP DCS field control stations, supporting 4‑20 mA HART‑capable field transmitters. This conformal‑coated I/O module acquires analog process signals, provides loop power for two‑wire field instruments, and extracts HART digital auxiliary data alongside standard 4‑20 mA analog measurement values. It addresses typical process‑plant pain points including ground‑loop interference, corrosion‑related circuit degradation, limited instrument diagnostic visibility, and high‑maintenance I/O hardware in corrosive cabinet environments. Process‑control engineers, DCS commissioning technicians and plant automation maintenance teams benefit from this unit. Independent channel‑level isolation eliminates cross‑channel noise coupling; HART functionality enables access to transmitter secondary variables, device status and fault diagnostics without extra hardware. The ISA‑G3 conformal coating protects circuits against corrosive gas and high‑humidity conditions, making it suitable for offshore and chemical‑plant deployments. It fits green‑field DCS builds and drop‑in spare replacement for existing CENTUM VP installations.
Application Scenarios
- Refinery & Chemical‑Plant Process‑Signal Acquisition: Collects pressure, flow, level and temperature measurements from HART‑enabled 4‑20 mA transmitters. Channel‑to‑channel galvanic isolation suppresses ground‑loop noise and improves measurement stability inside electrically noisy process‑control cabinets.
- Off‑shore Platform & Coastal‑Site DCS I/O Deployment: ISA‑G3 conformal coating mitigates salt‑mist and corrosive‑gas damage to printed‑circuit boards, extending module service‑life in harsh coastal‑site cabinet environments. Built‑in HART support delivers rich instrument diagnostic data for predictive‑maintenance workflows.
- Power‑Plant Boiler & Auxiliary‑System Monitoring: Interfaces with field transmitters for boiler‑feedwater, steam‑pressure and flue‑gas‑treatment measurement loops. Open‑loop and short‑circuit channel diagnostics speed up field‑loop fault‑isolation during plant operation.
- CENTUM VP DCS Retrofit & Spare‑Part Replacement: Direct‑form‑factor replacement for existing AAI135‑series I/O hardware. Back‑plane compatibility removes rack‑modification work and shortens DCS‑system downtime during module swap‑out.
Reviews
There are no reviews yet.