Description
- Product Model: 10014/H/F
- Brand: Honeywell
- Warranty: One Year
- Input Voltage: 5 VDC backplane, 24 VDC auxiliary
- Operating Temperature: 0 °C to +60 °C
- Storage Temperature: -40 °C to +85 °C
- Response Time: ≤ 8 ms
- Protection Class: IP20 (cabinet‑mount only)
- Accuracy Class: N/A (communication module)
- Output Frequency: N/A
- Rated Current Range: 0‑150 mA
- Communication Interface: Dual Tri‑state RS232 Ports (Port A, Port B)
- Supported Protocols: Honeywell FSC internal serial protocol
- Overload Capacity: 120% short‑term current withstand
- Dimensions: 40 mm × 186 mm × 129 mm
Product Overview
The Honeywell 10014/H/F is a dual‑port communication module built for the Honeywell FSC (Fail‑Safe Controller) safety system platform. This rack‑mounted unit establishes serial data links between the safety controller chassis, operator workstations, and external diagnostic devices. It offloads communication processing tasks from the main CPU via on‑board flash memory and local processing hardware, preventing communication bottlenecks during high‑volume data exchange. It addresses typical pain points including unstable serial links in safety‑critical cabinets, CPU overload from heavy HMI polling, and limited external diagnostic access for legacy safety racks. System integrators, plant maintenance technicians, and safety instrumented system engineers benefit from this hardware; it enables real‑time safety‑logic monitoring, simplifies fault troubleshooting, and supports hot‑swap compatible replacement for aging FSC installations.
Application Scenarios
- Petrochemical ESD System: Installed inside FSC safety cabinets to connect emergency shutdown controllers to local HMI consoles. Dual‑port RS232 interfaces maintain diagnostic and status data flow even under high electromagnetic interference from nearby pump and compressor drives, supporting fast operator response during process‑trip events.
- Oil & Gas Off‑shore Safety Control: Used to provide external serial access for field service tools. Technicians can retrieve event logs and module health data without interrupting running safety logic, reducing the need for full system shutdown during routine safety‑system audits.
- Power Plant Burner Management System: Acts as the serial gateway between FSC safety logic and auxiliary monitoring equipment. It isolates external serial devices from the safety backplane, suppressing voltage transients that could trigger unintended safety‑logic faults.
Reviews
There are no reviews yet.