Technical Specifications

• Product Model: 62K‑NHC0‑CB (user input:62k‑NHCO‑CB)
• Brand: VIPA (Yaskawa group)
• Warranty: One Year
• Input Voltage: DC24 V, allowable range 20.4‑28.8 V DC; rated current 1.36 A, power consumption 15 W
• Operating Temperature: 0 °C ~ +50 °C
• Storage Temperature: ‑20 °C ~ +60 °C
• Response Time: HMI screen refresh cycle ≤100 ms
• Protection Class: Front panel IP65; rear side IP20; panel‑cutout mounting type
• Display: 10‑inch TFT touch screen, resolution 1024×768, resistive touch
• Hardware Platform: Cortex‑A8 1000 MHz; work memory 256 MB; user memory 128 MB; SD card slot; buffered real‑time clock
• Communication Interfaces: 2×10/100 Mbps Ethernet(RJ45), COM1 RS232, COM2 RS232/RS422/RS485, USB‑A host port
• Supported Protocols: Siemens S7‑MPI, Profibus‑DP, Modbus TCP/RTU; Windows Embedded CE 6.0 OS, supports Movicon visualization software
• Overload Capacity: Built‑in reverse‑polarity protection, surge suppression for power‑supply terminal
• Dimensions: Front panel 325 mm × 263 mm × 6 mm; rear housing 310 mm × 248 mm × 50 mm; cut‑out size 311 mm × 249 mm; weight approx.3.35 kg
• 

Application Scenarios

• Factory Production‑Line Control Cabinet HMI: Installed on control‑cabinet door, implements equipment‑process‑monitoring, parameter modification and fault‑alarm display for assembly‑lines, packaging‑machinery.
• Water‑Treatment & Waste‑Water‑Process Control: Cooperates with PLC to realize flow‑valve‑pump‑group monitoring, historical‑alarm recording and on‑site operation for water‑plant stations.
• Metallurgy & Material‑Processing‑Plant Automation: Adapts to workshop‑dust‑vibration environment; IP65 front‑panel meets cabinet‑door field‑operation requirement.
• Building‑Energy‑Management & HVAC Control System: Realizes central monitoring for fan, air‑condition and cooling‑tower equipment.
• Legacy Automation‑System Retrofit & Spare‑Part Replacement: Direct‑fit replacement for original TP610LC+ HMI hardware; cut‑out dimension and communication‑interface compatibility minimizes cabinet‑door modification work and shortens equipment‑downtime during panel swap‑out.

Key Installation Notes

1. Panel‑cutout mounting by mounting‑clips; control cabinet door thickness must keep 2.5‑6 mm; ensure front‑panel IP65 sealing gasket intact to prevent dust‑water ingress.
2. Confirm DC24 V power supply within 20.4‑28.8 V range before power‑on; strictly observe power‑supply polarity.
3. Use shielded twisted‑pair cables for RS485 / Profibus‑DP communication; add terminal‑matching‑resistor at bus terminal.
4. Separate communication‑signal‑cables from high‑power‑motor‑feeder‑cables to reduce electromagnetic‑interference.