Description
Product Overview
The 83SR51 (order number GJR2396200R1210) is a dual-channel binary and analog control module for ABB’s PROCONTROL P14 DCS. Each of its two independent function units carries 4 digital inputs, 1 digital output, 2 analog inputs and 1 analog output, so one 6U rack slot handles the complete loop of an actuator — position demand out, position feedback in, limit switches and selector status in, and the run/enable command out. That is exactly the signal set used to drive electro-hydraulic, electro-pneumatic and electric motor actuators such as fan inlet vanes, damper drives, bypass valve positioners and large-skid drives. The module exchanges telegrams over the PROCONTROL station bus and addresses itself on insertion, which makes it a validated spare in plants still running P14 racks: replacing a failed card restores a valve loop without re-coding the loop, re-wiring the field terminations, or re-qualifying the control strategy.
Technical Specifications
- Brand: ABB
- Model: 83SR51
- Product Line: PROCONTROL P14 (compatible with PROCONTROL P13 bus environment)
- Function: Dual-channel binary and analog control module (actuator loop controller / process interface)
- Channels: 2 independent function units; total 8 DI + 2 DO + 4 AI + 2 AO
- Digital Input: 4 per channel, dry-contact / NAMUR / 48 V DC class signals, isolated
- Digital Output: 1 per channel, relay output rated 2 A / 250 V AC, short-circuit protected
- Analog Input: 2 per channel, 0/4–20 mA, 12-bit resolution, accuracy ≤0.1%
- Analog Output: 1 per channel, 0/4–20 mA, 12-bit DAC, permissible load ≤500 Ω, short-circuit protected
- Control Function: Single-variable continuous control (PID-type) with super-ordinated master control, executed onboard per channel
- Communication: PROCONTROL P14 station bus via rack backplane; automatic node addressing on insertion, no DIP switches or node-ID jumpers
- Power Supply: 24 V DC from the P14 rack backplane (no separate field supply)
- Isolation: ≥2500 V AC channel-to-system and channel-group isolation
- Diagnostics: Front-panel ST (general fault) and SG (module-specific fault) LEDs; fault codes reported to the control system event list
- Operating Temp: 0 to +60 °C (rack / cabinet ambient)
- Mounting: 6U Eurocard, single-slot, plug-in, hot-swappable in the P14 rack
- Dimensions / Weight: 198 x 261 x 20 mm (D x H x W); approx. 0.55 kg
- Origin: Sweden
- Warranty: One Year
- Condition: 100% New & Original
Key Notes
- Confirm the module suffix (E / F) printed on the label before ordering — both share order number GJR2396200R1210 but are different hardware generations, and the installed Automation Runtime / PDDS configuration expects a specific one.
- The digital output is a relay contact rated 2 A at 250 V AC; external spark suppression is required for inductive AC loads.
- Analog output load must stay at or below 500 Ω, otherwise the 4–20 mA setpoint saturates and the actuator strokes to its limit.







Reviews
There are no reviews yet.