Description
- Product Model: FPBA‑01 (Order‑code:3ABD68469325)
- Brand: ABB
- Warranty: One Year
- Input Voltage: Powered by drive internal option slot; no external auxiliary power required
- Operating Temperature: ‑10 °C ~ +55 °C
- Storage Temperature: ‑40 °C ~ +85 °C
- Response Time: PROFIBUS‑DP cyclic real‑time data exchange; supports DP‑V0 cyclic I/O, DP‑V1 acyclic parameter access; auto‑detects telegram typeABB Group
- Protection Class: IP20, drive internal option slot plug‑in card
- Accuracy Class: N/A (PROFIBUS‑DP fieldbus adapter for ABB variable‑frequency drives)
- Baud Rate: 9.6 kbit/s‑12 Mbit/s PROFIBUS‑DP standard rate
- Rated Capacity: Supports PPO 1‑8, STD1/STD2 telegrams; communication profiles: ABB Drives, PROFIdrive, Transparent‑16, Transparent‑32 bitABB Group
- Communication Interface: 9‑pin D‑Sub female PROFIBUS‑DP port; internal host connector mates with drive option slot; module DIP‑switches for PROFIBUS station address setting
- Supported Protocols: PROFIBUS‑DP‑V0 / DP‑V1; requires corresponding GSD file for PLC configurationeero
- Overload Capacity: Galvanic isolation between drive internal logic and PROFIBUS bus side; status LED indicators (RUN, COM, FAULT); communication loss fault configurable inside drive parameters; no bus‑redundancy support
- Dimensions: Standard ABB drive option‑card form‑factor; weight approx 0.15 kg
Product Overview
The ABB FPBA‑01 is a plug‑in PROFIBUS‑DP fieldbus adapter option card for ABB frequency converters. It connects compatible ABB drives to PROFIBUS‑DP PLC systems, enabling cyclic start/stop, speed reference transmission, actual‑value feedback and acyclic read/write of drive parameters over fieldbusABB Group. Station address is set via on‑board DIP switches. Drive parameter group 51 is used for adapter configuration. It solves typical integration pain‑points: connecting ABB drives into legacy PROFIBUS‑DP automation systems without large hard‑wired I/O wiring work. Automation and drive technicians benefit from multiple supported communication profiles, wide drive‑model compatibility and drop‑in spare‑part replacement for existing FPBA‑01 installationseero.
Application Scenarios
- Factory production‑line drive control: Installed as option card inside ACS355 / ACS580 / ACS880 / ACSM1 / ACS850 / ACQ810 drives; connects pumps, fans, conveyors to Siemens S7 PROFIBUS‑DP PLC systemsABB Group.
- Process‑plant auxiliary motor control: For water‑treatment, cement, paper‑making industry; integrates variable‑speed drives into PROFIBUS‑DP DCS.
- Retrofit of legacy PROFIBUS‑DP automation systems: Upgrade existing ABB drives for fieldbus control, reuse original PROFIBUS network infrastructure.
- Spare‑part replacement for existing ABB drive PROFIBUS‑DP nodes.
Reviews
There are no reviews yet.