Description
Technical Specifications
- Product Model: 1SAJ240100R1010 PDP22‑FBP.100
- Brand: ABB
- Warranty: One Year
- Input Voltage: 24 V DC, power supplied by connected FBP host device
- Operating Temperature: -25 °C to +70 °C
- Storage Temperature: -40 °C to +85 °C
- Response Time: PROFIBUS DP cycle dependent, max 12 Mbit/s baud rate
- Protection Class: IP65 for plug‑in fieldbus connector assembly
- Accuracy Class: Communication interface, no measurement accuracy rating
- Output Frequency: Not applicable
- Rated Current Range: 0.037 A typical power consumption, 0.9 W power lossABB Group
- Communication Interface: M12 PROFIBUS‑DP connector, integrated 1 m FBP plug‑in cable assembly
- Supported Protocols: PROFIBUS DP‑V0, PROFIBUS DP‑V1, PNO‑certified slave interfaceABB Group
- Overload Capacity: Built‑in short‑circuit and reverse‑polarity protection
- Dimensions: 48.5 mm × 67 mm × 1066 mm (1 meter fixed cable length)ABB Group
Product Overview
The ABB 1SAJ240100R1010 PDP22‑FBP.100 is a pre‑assembled 1‑meter FieldBusPlug communication adapter for connecting FBP‑compatible motor starters and UMC motor controllers to PROFIBUS‑DP industrial networks. This ready‑to‑use bus plug eliminates custom field‑bus cable assembly work and enables cyclic and acyclic data exchange between low‑voltage motor control hardware and PLC master stations. It addresses typical MCC‑site pain points including inconsistent bus signal integrity, improper termination, and extra wiring labour for multi‑node fieldbus topologies. Panel builders, system integrators and plant automation technicians benefit from this component; integrated diagnostic LED indicators deliver fast visual feedback for bus communication faults. It supports DP‑V0 cyclic process data for motor commands and status feedback, alongside DP‑V1 acyclic access for device parameterisation and diagnostics. It suits both new‑build MCC assemblies and retrofits of existing FBP‑ready motor‑control hardware without heavy cabinet rewiring.
Application Scenarios
- Motor Control Center (MCC) PROFIBUS DP Integration: Connects ABB FBP‑enabled motor starters and UMC series controllers to PROFIBUS‑DP trunk lines. It transmits motor running status, current values, fault codes, and accepts start‑stop and reset commands from the host PLC, centralising motor‑asset management within the automation platform.
- Manufacturing Production‑Line Control Cabinets: Deployed for pump, fan and conveyor motor control within assembly‑plant control panels. The fixed‑length 1 m pre‑wired assembly simplifies modular cabinet layout, cuts field wiring errors and supports fast commissioning for multi‑motor‑node systems.
- Process‑Industry Auxiliary Motor Retrofit Projects: Upgrades existing FBP‑capable motor‑control units to PROFIBUS DP‑V1 capability. The factory‑terminated 1 m cable removes on‑site cable stripping and crimping work, shortening plant downtime during fieldbus‑migration upgrades.
Reviews
There are no reviews yet.